Votre panier est vide.

Panier

BROWNELLS MULTI-VISE™

Traduction automatique (Description - Fabricant): Ne pas ajuster les emplois pour votre étau ; ajuster vos Multi-Vise™ à l’emploi. Multi-étau ajuste dans toutes les directions un emploi peut vous emmener. Plus...

080000048

Facilement Adaptable & polyvalent, Construction de qualité qui dure encore et encore

Ne pas ajuster les emplois pour votre étau ; ajuster vos Multi-Vise™ à l’emploi. Multi-étau ajuste dans toutes les directions un emploi peut vous emmener... positionner horizontalement, verticalement et la tourner 360 ° dans un plan horizontal. Multi-étau s’adapte à presque n’importe quel emploi ; forage, production, stock travail, soudure, ponçage et la tenue de sacrément près de quoi que ce soit. Les matériaux de haute qualité aux États-Unis et de l’artisanat aller en produisant l’étau multiples. Le corps est construit en dur, résistance à la traction de 50 000 lb/po2, ductile, fer à repasser, qui rend le dernier et le dernier. Vous n’aurez pas à serrer ou desserrer les colliers supplémentaires lorsque vous tournez multi-étau sur le côté ou faire tourner en arrière, parce que le système de verrouillage cam pratique verrouille automatiquement multi-étau en position lorsque vous serrez les mâchoires. Précision, lisse, visages de la mâchoire combinent une pression ferme avec une finesse douce de tenir solidement métal, bois ou plastique. Le 4140, vis acier au chrome-molybdène, nickelé, résistant à la rouille se transforme sans effort.

Caractéristiques : corps en fonte, peinture verte, usinées avec précision. Mâchoires sont 3½"(14.5 cm) x 2½" (6,3 cm), ouvre à 5"(12,7 cm). 1¾"(4,4 cm) carré enclume. 18 lb (8kg) en poids

Plus...

Easily Adaptable & Versatile, Quality Construction That Lasts and Lasts

Don’t adjust jobs to your vise; adjust your Multi-Vise™ to the job. Multi-Vise adjusts in every direction a job can take you…position it horizontally, vertically, and rotate it 360° in a horizontal plane. Multi-Vise adapts to nearly any job; drilling, filing, stock work, soldering, sanding, and the holding of darn near anything. The highest quality U.S. materials and craftsmanship go into producing the Multi-Vise. The body is constructed of tough, 50,000 psi tensile strength, ductile, iron, which makes it last and last. You won’t have to tighten or loosen extra clamps when you turn Multi-Vise on its side or rotate it back and forth, because the convenient cam locking system automatically locks Multi-Vise in position when you tighten the jaws. Precision-machined, smooth, jaw faces combine firm pressure with a gentle finesse to securely hold metal, wood, or plastic. The 4140, chrome-moly-steel, nickel-plated, rust-resistant lead screw turns effortlessly.

SPECS: Cast iron body, precision-machined, green paint. Jaws are 3½" (9.0cm) x 2½" (6.3cm), opens to 5" (12.7cm). 1¾" (4.4cm) square anvil. 18 lb. (8kg) wt.

Plus...

Évaluations client de BROWNELLS Multi-Vise, Body

Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 2,2

Dissapointed (06/04/2010)

We have finally learned how to make tools from the Chinese. This vise is a bit crude, no documentation, rough casting, lots of toolmarks on the machined surfaces. If you want to sell an expensive, top of the line vise, get Wilton to make it for you. We'll pay for it. Sending mine back.

return to vender! (02/11/2010)

i started working in a shop that already had this vise installed at my bench. i was very displeased by it from day one, THEN i noticed it was a brownells product...that was very disapointing! its rough, the jaws don't meet up when fully closed, the lock is a total joke, and i've felt smoother at the import stores! and to top it all its 10 times what i paid for the garage sale vise one i have at home that works just fine!
NOT up to spec for a brownells product!

Think twice before buying (16/05/2012)

This product is definanely not up to Brownell's standards. Today my second and replacement vise pulled the threads out of the lead screw nut. The first vise cracked through the moveable jaw. Of course parts are available to repair these issues but the inconvience of not having the vise to use and the expense of replacement parts has me thinking this is the last time I will be going that route. I hate to say it but the import vises built to the same design have held up better in the shop and are a fraction of the price. Brownell's used to sell the Wil-Burt brand vise and I have been using one of them for 40 years, too bad we can;t get tools made like that here in the U.S.A.any more.

Different from unit shown in video, huh? (06/06/2012)

1) Knobs roll pinned into handle, NOT threaded.
2) No o-rings installed on handle.
3) 1 set screw to hold lead screw in (do not know what 2nd set screw in parts list is for).
4) No small hole at rear of spherical portion of body casting (Maybe a hole for 2nd set screw for additional locking force?)

Body holes machined eccentrically by a significant amount.

Very disappointed. Returned. Would love to know why I received a version so different from video. New Old Stock that was being recycled?

Bought a Berry's Mfg Versacradle vice for light work (sold by Brownells) and a Rigid (Pedding-Haus) XF-45 for heavy work. Delighted with Berry's and Rigid.

What happened to Versa-Vise? (18/11/2012)

First day of school we were assigned a RED Versa-Vise. At the end of 3 years I bought it from the school and I am still using it. Thought I would try this and wow I had hoped they would be the same, no cigar. It will never be what the real thing is, alas this one is a disappointment.

Stunned... (24/12/2012)

Stunned...at the comparison between these reviews of the current product vs. the (red) one I've been using for over 40 yrs. I also inherited another red one, probably about the same vintage, used heavily by my uncle, a lifelong collector/shooter. Both of these vises are sturdy, well made, and very rugged tools. Not to mention more versatile than any other vise I've ever seen. Both also have a set of pipe jaws that straddle the moveable jaw bar, inside the main jaws. Simple and effective.
It's dismaying to read how the mighty have (apparently) fallen. And now I wouldn't sell either of mine for twice the asking price!
Long live the - original - Versa Vise!

Not Original Versa Vise Quality (03/10/2013)

I really wanted to like this vise as it appeared to be an updated version of the original Versa Vise (a long time favorite gunsmith vise), it is made in the USA, and it is green (like my RCBS stuff). Despite the poor reviews, I went ahead and bought two of these vises. The fit and finish of both vises I received was terrible (rough castings). The Chinese versions of this vise style appear better fit and finished. The worst part was that the jaws did not line up on either of the two vises I received. Again, I've seen the Chinese versions line up better. For the price, the quality was unacceptable. Both vises were returned.

I like this vise (29/10/2016)

After reading all of the negative reviews I was a little reticent of purchasing this vise..My instructors used it in class and overwhelming recommended it. Jaws line up perfectly and no rough edges. I use it to fit small extractors as well as drifting sights, of course using pads and a micro fiber to prevent scratches. Really handy to compress mainsprings on struts..It positions to any direction I need, not to mention vertical. If I need to remove a barrel I use my barrel vise. I have my vise mounted to a 3" work table. Use it all day as my strong third hand. Two years now and not the first problem what so ever.

vise (23/04/2018)

The metal in this vise is very soft.

great vise but lot quality may vary (30/04/2018)

Second vise I received is great in every way: good finish, mating surfaces that are flat and square. I use many vises as a tool and die maker. This vise was a no-hassle replacement from Brownells.

The first vise delivered had multiple flaws:

1) crack in the casting of the main body could have led to a catastrophic failure

2) circular rotational mating surfaces were not flat, but gouged.

Recommendation: buy this, but inspect immediately and if you find any flaws, request a replacement. Flaws in a vise are a safety hazard.

Also; get both the aluminum/rubber and leather inserts to protect your finished parts from the iron surfaces.

Best Gunsmithing Vise Available (08/06/2018)

I donât normally write reviews but I feel like this vise has been unfairly reviewed on this site. The best way to describe this vise is, buy once cry once. This design works great for gunsmithing but I tried to save a few dollars and bought the same design on Amazon and through another company that bought the original versa-vise design. Both of the other vises broke and were cheaply made with foreign steel. This Brownellâs vise is made in America with American steel. I cannot believe the quality difference between what I had before. I absolutely love this Brownellâs vice.

Lire 11 plus d'avis sur brownells.com

54.99 54.99 1 EUR

080000048
BROWNELLS Multi-Vise, Body
Ref Fabricant: 2016 Ne pas ajuster les emplois pour votre étau ; ajuster vos Multi-Vise™ à l’emploi. Multi-étau ajuste dans toutes les directions un emploi peut vous emmener... positionner horizontalement, verticalement et la tourner 360 ° dans un plan horizontal. Multi-étau s’adapte à presque n’importe quel emploi ; forage, production, stock travail, soudure, ponçage et la tenue de sacrément près de quoi que ce soit. Les matériaux de haute qualité aux États-Unis et de l’artisanat aller en produisant l’étau multiples. Le corps est construit en dur, résistance à la traction de 50 000 lb/po2, ductile, fer à repasser, qui rend le dernier et le dernier. Vous n’aurez pas à serrer ou desserrer les colliers supplémentaires lorsque vous tournez multi-étau sur le côté ou faire tourner en arrière, parce que le système de verrouillage cam pratique verrouille automatiquement multi-étau en position lorsque vous serrez les mâchoires. Précision, lisse, visages de la mâchoire combinent une pression ferme avec une finesse douce de tenir solidement métal, bois ou plastique. Le 4140, vis acier au chrome-molybdène, nickelé, résistant à la rouille se transforme sans effort.

54.99 EUR 10 54,99 € *

En Stock - Expédition de notre Dépôt USA (14 à 28 jours)

Caractéristiques: Style: Corps

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Style: Corps

Détails de l'article

Fabriqué au USA

Facilement Adaptable & polyvalent, Construction de qualité qui dure encore et encore

Caractéristiques : corps en fonte, peinture verte, usinées avec précision. Mâchoires sont 3½"(14.5 cm) x 2½" (6,3 cm), ouvre à 5"(12,7 cm). 1¾"(4,4 cm) carré enclume. 18 lb (8kg) en poids

Plus...

Easily Adaptable & Versatile, Quality Construction That Lasts and Lasts

SPECS: Cast iron body, precision-machined, green paint. Jaws are 3½" (9.0cm) x 2½" (6.3cm), opens to 5" (12.7cm). 1¾" (4.4cm) square anvil. 18 lb. (8kg) wt.

Plus...

Évaluations client de BROWNELLS Multi-Vise, Body

Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 2,2

Dissapointed (06/04/2010)

return to vender! (02/11/2010)

Think twice before buying (16/05/2012)

Different from unit shown in video, huh? (06/06/2012)

What happened to Versa-Vise? (18/11/2012)

Stunned... (24/12/2012)

Not Original Versa Vise Quality (03/10/2013)

I like this vise (29/10/2016)

vise (23/04/2018)

The metal in this vise is very soft.

great vise but lot quality may vary (30/04/2018)

Best Gunsmithing Vise Available (08/06/2018)

Lire 11 plus d'avis sur brownells.com

Connexion

Mot de passe oublié ?
S'inscrire

Notre garantie - Votre satisfaction.

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous!
Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 90.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.

Nous vous garantissons votre satisfaction à 100% -Toujours!

Votre Equipe Brownells France.

Connectez-Vous

Brownells.fr

Catégories

Commander

Service Clientèle

Bienvenue!

Bienvenue sur brownells.fr, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en France!

La promesse de Brownells France

La promesse de brownells.fr pour nos clients: Votre satisfaction garantie à 100% - Si, pour quelque raison que cela soit, vous n’êtes pas satisfait à 100% du produit que vous avez acheté sur notre site, vous n’aurez qu’à nous le retourner pour obtenir un remboursement ou un échange.

Livraison Gratuite

Chez Brownells.fr la livraison en Colissimo Suivi est offerte à partir de 299€ pour les articles en stock (Offre réservée aux particuliers et en France métropolitaine).

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous!

Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Nous vous garantissons votre satisfaction à 100% -Toujours!

* Le prix inclut la TVA mais pas la livraison .

Vue classique

Vue mobile