Monte-optique décalée Arisaka : la solution idéale pour ta carabine !
Le Monte-optique décalé Arisaka, en attente de brevet, est une solution de montage modulaire qui te permet de choisir une position décalée de 35 ou 45 degrés pour un point rouge sans nécessiter de composants supplémentaires. La position à 35 degrés rapproche le point rouge des lunettes plus fines et plus petites, tandis que la position à 45 degrés offre un dégagement supplémentaire autour des tourelles plus larges ou des lunettes à plus fort grossissement.
Caractéristiques :
- Conçu pour être fixé sur le rail Picatinny supérieur d'un fusil AR15.
- Lorsque le fusil est incliné pour utiliser le point rouge décalé, l'optique reste centrée au-dessus du canon et maintient une hauteur de co-witness de 1/3 inférieure.
- La base et les plaques peuvent être inversées, permettant une utilisation à gauche ou à droite.
- La base et les plaques peuvent être achetées séparément ou en combinaison, offrant une possibilité d'évolution à l'avenir lorsque tu acquiers de nouveaux points rouges.
Détails techniques :
- Poids : 1.9 oz sans optique.
- Longueur : 1.0" pour la base, occupant trois emplacements Picatinny (douilles de recul jumelées et vis de serrage).
- Hauteur : La base se situe à 0.180" au-dessus de la surface du rail Picatinny.
- Fabriqué en aluminium 6061-T6 usiné CNC et anodisé en dur MIL-A-8625 Type III.
- Les tournevis Torx Plus IP20 et IP27 sont inclus avec chaque base.
Compatibilité des plaques :
Hauteur standard (pour montages de lunettes de 1.5" à 1.8") :
- Plaque 1 : Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Plaque 2 : Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice
- Plaque 4 : Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Plaque 5 : Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (pas 5X), Holosun HS403 (pas A), HS503, HS515, HS530
- Plaque 6 : Aimpoint Acro
Hauteur élevée (pour montages de lunettes de 1.9" à 2.2") :
- Plaque 7 : Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Plaque 8 : Trijicon RMR, SRO, Holosun 407C, 507C, 508T
- Plaque 10 : Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Plaque 11 : Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (pas 5X), Holosun HS403 (pas A), HS503, HS515, HS530
- Plaque 12 : Aimpoint Acro
The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35 degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45 degree position provides additional clearance around wider turrets or larger, higher magnification scopes. The Arisaka Offset Optic Mount is designed to be attached to the top Picatinny rail of an AR15 rifle. When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height. The base and optic plates can be reversed, allowing for use on the left or right side. The base and plates can each be purchased separately or as a combination, providing an upgrade path in the future as users acquire new red dot sights. Weight: 1.9 oz without optic. Length: 1.0" for the base, which occupies three Picatinny slots (twin recoil lugs and clamping screw). Height: The base sits 0.180" above the surface of the Picatinny rail. The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized. IP20 and IP27 Torx Plus bit drivers are included with each base. Standard height (for 1.5" to 1.8" scope mounts): Plate 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 6: Aimpoint Acro Tall height (1.9" to 2.2" scope mounts): Plate 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T Plate 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 12: Aimpoint Acro