Votre panier est vide.

Panier

VOLQUARTSEN
RUGER® MARK II™/MARK III™ TARGET SEAR

810162011680 930000050

Remplace le percuteur d'usine pour une détente légère et nette

Ce percuteur spécialement conçu offre au tireur une détente plus courte, plus rapide et avec une cassure plus nette. Le percuteur est découpé au fil EDM à partir d'acier à outils A2 trempé. Compatible avec les Ruger® MKII™, MKIII™ et 22/45™.

Plus...

Replaces Factory Sear For A Light, Clean-Breaking Trigger Pull

This specially designed sear provides the shooter with a shorter, faster, cleaner breaking trigger pull. The sear is wire EDM-cut from hardened A2 tool steel. Fits Ruger® MKII™, MKIII™ and 22/45™.

Plus...

Évaluations client de VOLQUARTSEN RUGER® MARK II™/MARK III™ TARGET SEAR

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4,1

Did not fit in my MK I (17/11/2009)

Not sure why Brownells says that this works with the Mk I. It doesn't. Even Volquartsen's website says Mark II or III only....

super item - not for Mark I (10/03/2010)

Installs as directions indicate. Works great. Much better trigger pull.
Have a Mark III
DOES NOT WORK IN MK I

It will work on MK I Rugers (25/03/2010)

On most MKI's the [...] will work but on others fitting is required with the safety which is why we do not sell this part as a drop in item for the MKI.

Volquartsen sear for Mark II (23/05/2011)

This sear is slightly taller than the original and would not allow the gun to be cocked.

Sweet! (02/05/2013)

I installed this sear in a MKIII target model. The difference in trigger pull is amazing. The release is very crisp. Installation for this and the Volquortsen trigger took about 45 minutes including a fair amount of associated cleaning, but I am familiar with the workings of these pistols. This sear is the single biggest improvement you can make to a MKII or MKIII Ruger.

Oh man.... (25/10/2013)

This sear totally cuts the trigger pull in half! I love it. Makes the gun even more fun to shoot. I also added a Tandemkross hammer bushing and between the two, I have the most consistent trigger pull ever. I highly recommend the Volquartsen sear for any MKIII or 22/45 owner.

Work on Ruger Standard Pistol (30/04/2014)

Installed this sear and the Volquartsen stainless trigger easily on my Ruger Standard Pistol(pre Mark I)without any modifications. What a difference it made. Cut the trigger pull in half and no more creep. Very smooth and crisp trigger now. Best investment for this pistol.

Very Nice!!!! (09/05/2014)

I installed this sear and also the company's SS target trigger. My original trigger pull was a heavy and grainy 4&1/4Lbs. This Sear and trigger combo brought it down to a very nice crisp and clean 1&3/4Lbs.I highly recommend it! FYI YouTube has videos that keep you outta trouble when disassembling and installing these parts.

Good, but not great (12/08/2014)

My Ruger Mark III 22/45 is well-tuned, well-cared for, and has many thousands of rounds through it. The factory sear and hammer provided a crisp, repetitive three-pound release. While I have been quite satisfied with it, I installed the Volquartsen sear to see if it measured up to the claims I've read in reviews.

The VQ sear dropped the release to a fairly repetitive 1.6 pounds, but it feels a little mushy. I'll pass final judgement after a thousand rounds or so. But, at this point I'm not going to bother installing a VQ sear in my Mark III Target, which also has a crisp three-pound release. I'm perfectly happy with it.

Great Addition to those needing a Sear (03/09/2016)

I replaced the factory Sear in my MkIII TARGET along with other modifications. The Factory trigger had a lot of take up and over travel as well as creep and a heavy, gritty break. So when I installed a new flat Faced Trigger, I decided to do the sear as well. No Fitting is required in a Mk II or Mk III, and it will not fit a Mk I. BTW, This sear would have a higher rating if the three reviews that talk about attempting to install in a MKI were dropped. I cannot imagine that installing this sear, by itself, would not make a major difference. I Installed with other modifications, the results are spectacular. I know that now, My MkIII trigger has no perceptible creep and breaks like a glass rod. So this was a major improvement over the stock sear. Very Pleased.

What a game changer on my Mark II (02/01/2017)

I installed this sear on a 24 year old SS slab sided Ruger Mark II along with a Vq trigger installed 24 years ago it's a game changer , the trigger breaks clean with no creep . I installed a pre set , set screw in the trigger guard when I added the trigger 24 years ago . This pistol has a trigger pull weight of 1 1/4 to 1 1/2 lbs . The triggers are the old style SS kind . Should have done the complete pistol years ago .

If your into shooting USPSA steel plates add the sear, trigger and you'll be set .

DoubleTap

Should be the first upgrade you do! (16/02/2017)

Loved my new mkiii 22/45, everything but the trigger that is. After reading some reviews I ordered the volquartsen target sear. Install wasn't too bad after a few YouTube videos. The results are amazing! The trigger breaks so much cleaner and twice as easy as before just like it should.

Lire 12 plus d'avis sur brownells.com

54.9 54.9 1 EUR

Référence: 930000050
VOLQUARTSEN RUGER® MARK II™/MARK III™ TARGET SEAR
Ref Fabricant: VC2TS 810162011680 Ce percuteur spécialement conçu offre au tireur une détente plus courte, plus rapide et avec une cassure plus nette. Le percuteur est découpé au fil EDM à partir d'acier à outils A2 trempé. Compatible avec les Ruger® MKII™, MKIII™ et 22/45™.

54.9 EUR 5 54,90 € *

Délai de livraison environ 14-21 jours.
5 pcs. dans l'entrepôt de USA

Caractéristiques: Fabrication: Ruger Modèle: Mark I, Mark II

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Fabrication: Ruger Modèle: Mark I,Mark II Poids du colis: 0,009kg Hauteur d'expédition: 10mm Largeur d'expédition: 71mm Longueur d'expédition: 86mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.c

Remplace le percuteur d'usine pour une détente légère et nette

Plus...

Replaces Factory Sear For A Light, Clean-Breaking Trigger Pull

Plus...

Évaluations client de VOLQUARTSEN RUGER® MARK II™/MARK III™ TARGET SEAR

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4,1

Did not fit in my MK I (17/11/2009)

Not sure why Brownells says that this works with the Mk I. It doesn't. Even Volquartsen's website says Mark II or III only....

super item - not for Mark I (10/03/2010)

Installs as directions indicate. Works great. Much better trigger pull.
Have a Mark III
DOES NOT WORK IN MK I

It will work on MK I Rugers (25/03/2010)

On most MKI's the [...] will work but on others fitting is required with the safety which is why we do not sell this part as a drop in item for the MKI.

Volquartsen sear for Mark II (23/05/2011)

This sear is slightly taller than the original and would not allow the gun to be cocked.

Sweet! (02/05/2013)

Oh man.... (25/10/2013)

Work on Ruger Standard Pistol (30/04/2014)

Very Nice!!!! (09/05/2014)

Good, but not great (12/08/2014)

Great Addition to those needing a Sear (03/09/2016)

What a game changer on my Mark II (02/01/2017)

Should be the first upgrade you do! (16/02/2017)

Lire 12 plus d'avis sur brownells.com

Poursuivre vos achats

VOLQUARTSEN MARK II HAMMER BUSHING
RUGER® MARK II™ HAMMER BUSHING

VOLQUARTSEN

Non disponible

15,90 € *

Bushings Marteau

4,3

TANDEMKROSS MKIII & 22/45 MAGAZINE DISCONNECT BUSHING
MKIII™ & 22/45™ MAGAZINE DISCONNECT BUSHING

TANDEMKROSS

En stock

21,90 € *

Bushings Marteau

4,3

BROWNELLS #5 ROLL PIN PUNCH 5/32"
ROLL PIN PUNCHES

BROWNELLS

En stock

15,90 € * 14,90 € - 54,90 €*

Chasse Goupille

3,4

VOLQUARTSEN TARGET HAMMER
RUGER MK II™ TARGET HAMMER

VOLQUARTSEN

En stock

84,90 € *

Marteaux

HOGUE RUGER 22/45RP RUBBERIZED GRIP W/ FINGER GROOVES
RUGER® 22/45 RUBBER GRIPS

HOGUE

En stock

39,90 € * 37,90 € - 39,90 €*

Poignées

Connexion

Mot de passe oublié ?
S'inscrire

Notre garantie - Votre satisfaction.

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous!
Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 90.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.

Nous vous garantissons votre satisfaction à 100% -Toujours!

Votre Equipe Brownells France.

Connectez-Vous

Brownells.fr

Catégories

Commander

Service Clientèle

Notre identité

Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.

* Le prix inclut la TVA mais pas la livraison .

Vue classique

Vue mobile