Caractéristiques
- Poids du colis: 0,027kg
- Hauteur d'expédition: 10mm
- Largeur d'expédition: 91mm
- Longueur d'expédition: 173mm
Le prix inclut la TVA mais pas la livraison .
Référence: 969171900
N° fabr.: 17190
Le kit contient (1) ressort de marteau à 10 lb, (1) ressort de marteau à 11 lb et (1) ressort de marteau à 12 lb à puissance réduite. (1) ressort de retour de gâchette à 10 lb et (1) ressort de retour de gâchette à 11 lb à puissance réduite. Compatible avec les modèles 65, 66, 669, 689, 80, 82 et 83.En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.
En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.
Made a world of difference 15/04/2012
I used Taurus 669 Shooters Pak in a 44 Mag Raging Bull. I am not a gunsmith, however, the items are easy to identify and easy to replace. It may pay to have a helper handy-wear eye protection just in case. I used the 10lb. trigger spring and the 11lb hammer spring. The Raging Bull had a nice single action pull to begin with. I was primarily concerned with the double action trigger pull. The kit absolutely did the job. Single action pull is even better. Double action pull is fantastic compared to the original spring. I rapid shot a target at 25 yds using double action. All hits were well within a 3" pattern. This using a Magnum load. Before changing the springs, the pull was so heavy, I was darn lucky to hit paper at 25 yds.I used CCI Magnum primers in a few of these rounds. I had no problem with misfires.
GOOD BUT NOT THERE 28/12/2010
THE SPRINGS ARE VERY WELL MADE BUT I HAD PROBLEMS WITH THE 10 POUNDS TRIGGER SPRING, WHEN I INSTALED IT WAS HEAVIER THAN MY FACTORY SPRING.
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.