Caractéristiques
- Modèle: 70
- Type d'arme: Winchester
- Poids du colis: 0,159kg
- Hauteur d'expédition: 30mm
- Largeur d'expédition: 56mm
- Longueur d'expédition: 150mm
- UPC: 050806008335
Le prix inclut la TVA mais pas la livraison .
Référence: 080097170
050806008335 L'outil à ressort fournit une pression constante et directe pour maintenir les lug de bolte carrés contre le récepteur tout en lapant avec un abrasif en carbure de silicium de 600 à 800 grains. Offre de meilleurs résultats qu'une simple pression du pouce. Des manches filetées interchangeables s'adaptent aux actions populaires énumérées ci-dessous.Le kit de rodage de culasse BOLT LAPPING TOOLS de BROWNELLS est conçu pour t'aider à obtenir un ajustement précis des lug de verrouillage sur ton Winchester 70.
Cet outil à ressort offre une pression constante et directe pour maintenir les lugs de culasse à angle droit contre le récepteur tout en rodant avec un abrasif en carbure de silicium de 600 à 800 grains. Il fournit de meilleurs résultats que la simple pression des doigts.
Les manchons filetés interchangeables s'adaptent aux actions populaires énumérées ci-dessous :
Le kit contient tous les outils nécessaires pour roder tous les modèles énumérés dans le tableau. *Prix spécial, voir ci-dessous.
Very nice fit of parts. 31/08/2015
I bought this one-gun kit after trying to use the plunger body from the M14/M1/M1A kit. It did not fit a sleeve I had bought for the Large Ring Mauser. After receiving this kit with it's plunger body I then began trying all the parts one at a time.
Both plunger bodies are 0.5620" and the sleeves are 0.5625 except the M14, it was 0.563. There were little burrs on the plunger body of the M14 kit that made me think it would not fit the different sleeves. All fit well after a little lapping.
I plan on using the bolt lug lapping tool for several rifles I am building. After using the tool I believe I can use it to square the bolt face on a Mauser Large Ring VZ-24. After reaming the sleeve from existing 9/16" to a 5/8" I will press fit a drill bushing that is 5/8 x 3/8 and use the Mason Reamer Burr which has a 3/8" shaft. The Burr has been ground to 0.3740 to 0.3745. It has a buttery slip fit in the Drill Bushing.
Mauser threads are at a 55 deg pitch and not easy to find. Brownells sells the sleeve with the right threads for the '98 and the face truing Burrs. All you need is the drill bushing, the undersized drill, and the reamer to make the altered sleeve to be able to Lapp the lugs with the original unaltered sleeve, and true the face of your bolt with your altered sleeve. After, of course, you check that the receivers threads are true to the action. This can be checked with a mandrel which Brownells has too. This can be done for any rifle that Brownells has a sleeve for. Happy Gunsmithing, JL.
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.