Améliore ton tir avec le montage Trijicon RMR de BOMAR !
Le montage Trijicon RMR de BOMAR, fabriqué par EGW, est conçu pour offrir une fixation solide et fiable de ton viseur red dot.
Caractéristiques du produit :
- Matériau : Aluminium 7075
- Revêtement : Matte Black Hardcoat
- Longueur totale : 1.780"
- Largeur totale : 1.1"
- Matériel de montage : (2) vis à tête plate 6-32, (1) vis de réglage 6-32 X 3/16
- Compatibilité : Trijicon RMR, Holosun HS507C
Ce montage convient à :
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match
Ce montage ne convient pas à :
Pour installer ton viseur red dot Trijicon RMR, il te suffit de retirer la hausse arrière de ton arme et de la remplacer par notre montage. Aucune modification n'est nécessaire, et tu peux retirer notre montage à tout moment pour remettre ta hausse arrière.
Instructions d'installation :
- Retire la hausse arrière*
- Installe le montage EGW dans la queue d'aronde
- Serre la vis de réglage (si applicable)
- Place le viseur red dot sur le montage EGW (mettre un petit morceau de papier entre le viseur et le montage facilitera le retrait et empêchera le Loctite de se coller au viseur).
- Applique du Loctite bleu sur les vis de montage fournies
- Serre les vis de montage à 15in/lbs
Vis à tête plate : 2 vis fournies pour Trijicon RMR. Les vis incluses avec ce montage nécessitent une clé Allen de 5/64'' pour l'installation.
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.