Ajoutez un bouton de culasse surdimensionné à votre fusil sans avoir besoin d'un armurier
Ajoute un bouton de culasse surdimensionné à votre fusil 700 sans nécessiter de modifications permanentes à la culasse d'origine. Le contour ergonomique du Bolt Lift vous aide à obtenir une prise positive sur le bouton de culasse pour des tirs de suivi plus rapides dans toutes les conditions. Les deux moitiés renforcées en polymère du kit se fixent solidement autour du manche de culasse, maintenues par une vis Allen en acier et deux goupilles en acier inoxydable. Le kit comprend des entretoises en caoutchouc pour garantir un ajustement parfait sur les boutons de culasse Remington de différentes tailles.
SPÉCIFICATIONS : Polymère renforcé, noir ou terre plate foncée (FDE). Longueur de 1½" (3,8 cm), diamètre de 1" (2,5 cm). S'adapte aux boutons de culasse Remington 700. Comprend le matériel de montage en acier inoxydable, des joints toriques et des instructions.
Plus...
Add An Oversized Bolt Knob To Your Rifle Without Gunsmithing
Gives your 700 rifle an oversized bolt knob without requiring permanent modifications to the factory bolt. The ergonomic contour of the Bolt Lift helps you get a positive grip on the bolt knob for faster follow-up shots in all conditions. The reinforced polymer two halves of the kit clamp securely around the bolt handle, secured by a steel Allen screw and two stainless steel pins. Kit includes rubber O-ring spacers to ensure a tight fit on different-sized Remington bolt knobs.
SPECS: Reinforced polymer, black or flat dark earth (FDE). 1½" (3.8cm) long, 1" (2.5cm) dia. Fits Remington 700 bolt knobs. Includes stainless steel mounting hardware, O-rings, and instructions.
Plus...
Évaluations client de KINETIC RESEARCH GROUP BOLT LIFT, BLACK
Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 5
Great value and simple install.(29/01/2014)
This was well priced and simple to install. On my Remington tactical 700 bolt no spacers were needed and I did Loctite the screw. Tight fit and now can quickly work the bolt. Got the black knob which matches the bolt finish very well. It clears my scope and goes all the way down without touching the stock. Also it is removable.
Solid(13/11/2014)
This is a solid product that went on in less than 3 minutes. The knob is easy to affix to the factory bolt knob and there is no play in the knob once attached. I would purchase it again.
Remington 700P.
Works great. Much easier reload(03/12/2015)
Had mine on in less than a minute. Doesn't move at all once installed. I didn't put locktight on mine. Clears gun and scope no problem. much easier to grab ahold for quicker and smoother reloads. Comes in a little tin can and received a free window sticker. No brainer purchase. Only 25.00$
Great Value!(10/02/2017)
Installed on my 700 police. Cannot say anything bad about it because for a drop in part that only cost $30 there is nothing better.
Great piece of gear(18/02/2018)
Quick & easy installation on my 15 yr old Rem 700 LTR .223, fit tight enough that neither set of rubber spacer needed - actually had to "tap" the 2 halves together using Brownell's gunsmith hammer with synthetic head to avoid damage to synthetic material. Fit/functions perfectly on rifle, clears Leupold VX III 4.5x14 scope and does not interfere when rapidly cycling bolt closed. Greatly improved function for competition and cold weather predator hunting use
Serves Its Purpose(08/05/2014)
It's a good product, serves it's purpose.
Kinetic Research Group bolt lift(26/10/2014)
Fast shipping, simple to add to bolt handle and cleared the bolt handle perfectly. Much easier to find the end of the handle!
Sweet!(30/10/2014)
Ordered 2 of these in 2 colors for myself. Gave one to a nephew when he bought himself a Rem700. I installed one in my 300WM. It works great and looks good. Ordered another one for my 308W. I luv it.
Great bolt lift extension(28/11/2015)
I installed this in a R700 short action rifle. It can be done within 15 minutes or so. Everything that is needed to install it is in the box. You just need to know which O-ring rubber to use.
The bolt lift extension allows one to grab the bolt handle fast and/or makes bolt manipulation fast and easy. It gives the bolt a cool appearance.
This is my 3rd buy.
"KRG" Rem. 700 bolt lift - extender(22/12/2016)
I purchased two "KRG" bolt lift extenders for two of my Rem. 700's. One in .223 and the other is a .308. All I can say is these bolt lift extenders are great. Installed in less than 5 minutes and they perform beautifully. Clears both my long range Burris and Vortex scopes with ease. The motion to cycle the bolt has improved 100% over the existing small bolt handle. I was considering sending my bolts away to have them machined to receive a screw on bolt extender. I'm so glad I found these on the Brownell's web site instead. I placed my order in the height of the Christmas / holiday rush. They arrived 6 days later with free S/H offer. I highly recommend this product to anyone who doesn't want to spend a $100 permanently modifying their existing bolt. This product achieves exactly what I was looking for at less than 1/3 the cost of permanently modifying a bolt handle. If I ever sell one of my rifles I can easily remove the extender and use it again on a new firearm. Super product!
Référence: 100013741 KINETIC RESEARCH GROUP BOLT LIFT, BLACK Ref Fabricant: BLL-BLK Ajoute un bouton de culasse surdimensionné à votre fusil 700 sans nécessiter de modifications permanentes à la culasse d'origine. Le contour ergonomique du Bolt Lift vous aide à obtenir une prise positive sur le bouton de culasse pour des tirs de suivi plus rapides dans toutes les conditions. Les deux moitiés renforcées en polymère du kit se fixent solidement autour du manche de culasse, maintenues par une vis Allen en acier et deux goupilles en acier inoxydable. Le kit comprend des entretoises en caoutchouc pour garantir un ajustement parfait sur les boutons de culasse Remington de différentes tailles.
49.9EUR049,90 €
*
En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 100013742 KINETIC RESEARCH GROUP BOLT LIFT, FLAT DARK EARTH Ref Fabricant: BLL-FDE Ajoute un bouton de culasse surdimensionné à votre fusil 700 sans nécessiter de modifications permanentes à la culasse d'origine. Le contour ergonomique du Bolt Lift vous aide à obtenir une prise positive sur le bouton de culasse pour des tirs de suivi plus rapides dans toutes les conditions. Les deux moitiés renforcées en polymère du kit se fixent solidement autour du manche de culasse, maintenues par une vis Allen en acier et deux goupilles en acier inoxydable. Le kit comprend des entretoises en caoutchouc pour garantir un ajustement parfait sur les boutons de culasse Remington de différentes tailles.
49.9EUR449,90 €
*
Délai de livraison environ 14-21 jours.
Caractéristiques:Fabrication: RemingtonFinition: Flat Dark EarthMain: AmbidextreModèle: 700
Référence: 100033842 KINETIC RESEARCH GROUP BOLT LIFT, OD GREEN Ref Fabricant: BLL-ODG Ajoute un bouton de culasse surdimensionné à votre fusil 700 sans nécessiter de modifications permanentes à la culasse d'origine. Le contour ergonomique du Bolt Lift vous aide à obtenir une prise positive sur le bouton de culasse pour des tirs de suivi plus rapides dans toutes les conditions. Les deux moitiés renforcées en polymère du kit se fixent solidement autour du manche de culasse, maintenues par une vis Allen en acier et deux goupilles en acier inoxydable. Le kit comprend des entretoises en caoutchouc pour garantir un ajustement parfait sur les boutons de culasse Remington de différentes tailles.
Référence: 100033843 KINETIC RESEARCH GROUP BOLT LIFT, SAKO GREEN Ref Fabricant: BLL-GRN Ajoute un bouton de culasse surdimensionné à votre fusil 700 sans nécessiter de modifications permanentes à la culasse d'origine. Le contour ergonomique du Bolt Lift vous aide à obtenir une prise positive sur le bouton de culasse pour des tirs de suivi plus rapides dans toutes les conditions. Les deux moitiés renforcées en polymère du kit se fixent solidement autour du manche de culasse, maintenues par une vis Allen en acier et deux goupilles en acier inoxydable. Le kit comprend des entretoises en caoutchouc pour garantir un ajustement parfait sur les boutons de culasse Remington de différentes tailles.
Ajoutez un bouton de culasse surdimensionné à votre fusil sans avoir besoin d'un armurier
Ajoute un bouton de culasse surdimensionné à votre fusil 700 sans nécessiter de modifications permanentes à la culasse d'origine. Le contour ergonomique du Bolt Lift vous aide à obtenir une prise positive sur le bouton de culasse pour des tirs de suivi plus rapides dans toutes les conditions. Les deux moitiés renforcées en polymère du kit se fixent solidement autour du manche de culasse, maintenues par une vis Allen en acier et deux goupilles en acier inoxydable. Le kit comprend des entretoises en caoutchouc pour garantir un ajustement parfait sur les boutons de culasse Remington de différentes tailles.
SPÉCIFICATIONS : Polymère renforcé, noir ou terre plate foncée (FDE). Longueur de 1½" (3,8 cm), diamètre de 1" (2,5 cm). S'adapte aux boutons de culasse Remington 700. Comprend le matériel de montage en acier inoxydable, des joints toriques et des instructions.
Plus...
Add An Oversized Bolt Knob To Your Rifle Without Gunsmithing
Gives your 700 rifle an oversized bolt knob without requiring permanent modifications to the factory bolt. The ergonomic contour of the Bolt Lift helps you get a positive grip on the bolt knob for faster follow-up shots in all conditions. The reinforced polymer two halves of the kit clamp securely around the bolt handle, secured by a steel Allen screw and two stainless steel pins. Kit includes rubber O-ring spacers to ensure a tight fit on different-sized Remington bolt knobs.
SPECS: Reinforced polymer, black or flat dark earth (FDE). 1½" (3.8cm) long, 1" (2.5cm) dia. Fits Remington 700 bolt knobs. Includes stainless steel mounting hardware, O-rings, and instructions.
Plus...
Évaluations client de KINETIC RESEARCH GROUP BOLT LIFT, BLACK
Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 5
Great value and simple install.(29/01/2014)
This was well priced and simple to install. On my Remington tactical 700 bolt no spacers were needed and I did Loctite the screw. Tight fit and now can quickly work the bolt. Got the black knob which matches the bolt finish very well. It clears my scope and goes all the way down without touching the stock. Also it is removable.
Solid(13/11/2014)
This is a solid product that went on in less than 3 minutes. The knob is easy to affix to the factory bolt knob and there is no play in the knob once attached. I would purchase it again.
Remington 700P.
Works great. Much easier reload(03/12/2015)
Had mine on in less than a minute. Doesn't move at all once installed. I didn't put locktight on mine. Clears gun and scope no problem. much easier to grab ahold for quicker and smoother reloads. Comes in a little tin can and received a free window sticker. No brainer purchase. Only 25.00$
Great Value!(10/02/2017)
Installed on my 700 police. Cannot say anything bad about it because for a drop in part that only cost $30 there is nothing better.
Great piece of gear(18/02/2018)
Quick & easy installation on my 15 yr old Rem 700 LTR .223, fit tight enough that neither set of rubber spacer needed - actually had to "tap" the 2 halves together using Brownell's gunsmith hammer with synthetic head to avoid damage to synthetic material. Fit/functions perfectly on rifle, clears Leupold VX III 4.5x14 scope and does not interfere when rapidly cycling bolt closed. Greatly improved function for competition and cold weather predator hunting use
Serves Its Purpose(08/05/2014)
It's a good product, serves it's purpose.
Kinetic Research Group bolt lift(26/10/2014)
Fast shipping, simple to add to bolt handle and cleared the bolt handle perfectly. Much easier to find the end of the handle!
Sweet!(30/10/2014)
Ordered 2 of these in 2 colors for myself. Gave one to a nephew when he bought himself a Rem700. I installed one in my 300WM. It works great and looks good. Ordered another one for my 308W. I luv it.
Great bolt lift extension(28/11/2015)
I installed this in a R700 short action rifle. It can be done within 15 minutes or so. Everything that is needed to install it is in the box. You just need to know which O-ring rubber to use.
The bolt lift extension allows one to grab the bolt handle fast and/or makes bolt manipulation fast and easy. It gives the bolt a cool appearance.
This is my 3rd buy.
"KRG" Rem. 700 bolt lift - extender(22/12/2016)
I purchased two "KRG" bolt lift extenders for two of my Rem. 700's. One in .223 and the other is a .308. All I can say is these bolt lift extenders are great. Installed in less than 5 minutes and they perform beautifully. Clears both my long range Burris and Vortex scopes with ease. The motion to cycle the bolt has improved 100% over the existing small bolt handle. I was considering sending my bolts away to have them machined to receive a screw on bolt extender. I'm so glad I found these on the Brownell's web site instead. I placed my order in the height of the Christmas / holiday rush. They arrived 6 days later with free S/H offer. I highly recommend this product to anyone who doesn't want to spend a $100 permanently modifying their existing bolt. This product achieves exactly what I was looking for at less than 1/3 the cost of permanently modifying a bolt handle. If I ever sell one of my rifles I can easily remove the extender and use it again on a new firearm. Super product!