Il suffit de retirer la hausse de votre arme et de la remplacer par le support EGW afin de monter votre viseur point rouge Trijicon RMR. Vous pouvez enlever le support et remettre votre hausse à tout moment. Matériel de montage inclus. Instructions d'installation Retirez la hausse* Installez le support EGW dans la rainure de guidage Serrez la vis de blocage (si applicable) Placez le viseur point rouge sur le support EGW (placer un petit morceau de papier entre le viseur point rouge et le support facilitera le retrait et empêchera le Loctite de coller au viseur.) Appliquez du Loctite bleu sur les vis de montage fournies. Serrez les vis de montage à 15in/lbs. Les vis incluses avec ce support nécessitent une clé hexagonale de 5/64'' pour l'installation.
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Trijicon RMR red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.