CLYMER GO/NO-GO GAUGE SETS

308 Winchester Headspace Gauge Kit

Traduction automatique (Description - Fabricant): Commodes kits contiennent des calibres Go et no-Go pour vérifier exactement la longueur de la chambre pour s'assurer qu'elle répond aux spécifications de la SAAMI. Ces jauges sont des outils indispensables pour assurer une chambre serrée, précise et sécuritaire lors de l'introduction d'un nouveau Canon. Plus...

Référence: 184000038 184000038

Espace de tête jauge définit dans fusil populaire & pistolet calibres

Commodes kits contiennent des calibres Go et no-Go pour vérifier exactement la longueur de la chambre pour s'assurer qu'elle répond aux spécifications de la SAAMI. Ces jauges sont des outils indispensables pour assurer une chambre serrée, précise et sécuritaire lors de l'introduction d'un nouveau Canon. Toujours avoir un jeu sur place pour vérifier pour l'espace de tête correct avant d'acheter ou d'un nouveau pistolet de tir. Vient dans un pratique, durable de mallette en plastique.

Spécifications : acier, usiné aux spécifications de la SAAMI. Chaque ensemble contient une jauge go et un seul calibre interdite dans un seul calibre tels qu'énumérés ci-dessous.

Plus...

Headspace Gauge Sets In Popular Rifle & Pistol Calibers

Convenient kits contain Go and No-Go gauges for accurately checking chamber length to make sure it meets SAAMI specs. These gauges are essential tools for ensuring a tight, accurate, safe chamber when chambering a new barrel. Always have a set on hand to check for correct headspace before buying or firing a new gun. Comes in a handy, durable plastic carrying case.

SPECS: Steel, precision machined to SAAMI specs. Each set contains one go gauge and one no-go gauge in a single caliber as listed below.

Plus...

Évaluations client de 308 Winchester Headspace Gauge Kit

Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4,9

Just the Right Tool (12/10/2012)

I bought the set of .223 Clymer's along with the Colt Field 5.56 Gauge to verify my headspace on a new AR build. They worked great and were easy to use. I used a small magnetic tipped rod to remove them which also worked great. You cant go without them becuase your buddies don't have them either. If in doubt, check your headspace! Beats a trip to the emergency room and these are far cheaper. Besides, your wallet heals easier.

Great Tool (12/10/2012)

I bought the set of these Go/No-Go along with the Colt 5.56 Field Gauges to check the headspace on my new AR build. I bought a complete upper and a new BCG and really needed to know about the headspace. I for one can say if something "Can go wrong", it will go wrong with me and ruin a great day. Although this set may have a limited use, they are necessary to make completely sure you don't destroy your rifle and/or your great looks. A little pricey but my buddies didn't have these...but I do now. Better safe than sorry!!! The price was cheaper than a trip to the emergency room by far.

Only way to b shure (30/03/2017)

Ordered this gauge set to check my ar build. They come nicely packaged and they proved their purpose. I really prefer to know if headspace is acceptable before I pull the trigger the first time. Maybe a bit spendy, but I'm guessing you could probably sell them and recoupe most of the cost. Gonna keep mine, kinda got the bug now, might just build another one.

Not the best but they will work. (01/11/2009)

Clymer gauges are great but brownell was a little off. There was surface rust on one the gauges. It cleaned up fine but i shouldnt have to deal with it on a new gauge. The "handy, durable plastic carrying case" is a clear endmill/drill case. Over all it will work fine for what I need.

headspace guages (09/04/2013)

Only dealer i could find these guages from, will be getting others as needed.
Al Burt

Works great (25/11/2014)

Bought this set for my home built VZ58. These worked great! I had to press fit the barrel against the bolt with the go gauge inserted as the stop. From my one time use of this product using it as a press stop it was very durable showing no marks. Great product. I will buy Clymer again when I get to my 1911 build I've been putting off.

Excellent Gauge Kit (09/12/2016)

This set of gauges worked perfectly on a few AK builds. Very easy to use and they are precise. All new AK builds need to be head-spaced. Rifles function flawlessly!

Necessary Tool (16/12/2017)

Checking head space was easier than I thought. These gauges were quick and easy to use and the findings gave me a confident feeling about the new bolt that I installed on my AR 7.62x39. They should be handle with care as to not put any dings or scratches on them.

[...] a great set of gauges (01/02/2010)

[...] had a very nice surface finish. I used them to check the headspace of a FN FAL and they worked great. A must if your building a mil spec rifle that will shoot 7.62 X 51 and .308 Winchester.

.308 gauge (12/09/2013)

used it to headspace my m1a with criterion barrel.
the gauges are perfect !
awesome product

Lire 10 plus d'avis sur brownells.com

105.49 170.99 13 EUR

Sale

184000038
308 Winchester Headspace Gauge Kit
Ref Fabricant: GONG308WIN Commodes kits contiennent des calibres Go et no-Go pour vérifier exactement la longueur de la chambre pour s'assurer qu'elle répond aux spécifications de la SAAMI. Ces jauges sont des outils indispensables pour assurer une chambre serrée, précise et sécuritaire lors de l'introduction d'un nouveau Canon. Toujours avoir un jeu sur place pour vérifier pour l'espace de tête correct avant d'acheter ou d'un nouveau pistolet de tir. Vient dans un pratique, durable de mallette en plastique.

89.99 EUR 76 89,99 € * 105,49 €

En stock

Caractéristiques: Calibre: 308 Winchester Style: Kit Jauge

CLYMER GO/NO-GO GAUGE SETS

308 Winchester Headspace Gauge Kit

Évaluations client de 308 Winchester Headspace Gauge Kit

Caractéristiques

Détails de l'article

Évaluations client de 308 Winchester Headspace Gauge Kit