Votre panier est vide.

Panier

WOLFF AR-15/M16 EXTRA-POWER HAMMER SPRING

Hammer Spring

Traduction automatique (Description - Fabricant): Ressorts en acier durables, alimentent le marteau supplémentaire pour assurer l'inflammation appropriée avec chaque appui sur la détente. Plus...

Référence: 969000100 969000100

Aide à élimine les grands de problèmes communs d'allumage lors de l'utilisation de munitions avec des amorces durs

Ressorts en acier durables, alimentent le marteau supplémentaire pour assurer l'inflammation appropriée avec chaque appui sur la détente. Remplace le printemps de l'usine.

Spécifications : acier. Environ 23/32 po (18,2 mm) de large, 2"(5,1 cm) de long.

Plus...

Helps Eliminate Common Ignition Problems Great When Using Ammo With Hard Primers

Durable, steel springs provide extra hammer power to ensure proper ignition with each trigger pull. Replaces factory spring.

SPECS: Steel. Approximately 23/32" (18.2mm) wide, 2" (5.1cm) long.

Plus...

Évaluations client de Hammer Spring

Nombre d'évaluations: 16
De brownells.com: 16
Note moyenne: 4,7

No more Failure to Fire (13/01/2013)

Eliminate Failure to Fire in 7.62x39 upper with TULAmmo, and Chiappa .22 upper with remington ammo. Had Bushmaster lower parts kits. Heavier hammer was not required

Never misfire again (18/04/2016)

I first tried this spring in a AR 10 I built a few months back and the original would not fire a single factory load. I installed the spring and never misfired again. I had a 5.56 that I built and it occasionally would misfire. So I broke it down in the field and installed the heavy spring and had the same great results. The gun functioned perfict every time.

Made Improvement (04/07/2017)

Helped out my 7.62x39 upper. Just realize a side effect is that the bolt will be harder to pull back. Enough of difference that my wife and kid complain about it.

AF15 with milsurp 5.45 (11/08/2010)

I shoot milsurp 5.45 Russian ammo in my AR-15, and the hard primers caused between 3 to 5 unfired rounds per mag using the stock hammer spring.
This Wolff spring gave me 3 unfired rounds in my last 40 to 50 mags with no other changes.

Does work for AR15 Timney triggers (20/10/2010)

Tried this on my timney trigger after getting light strikes on primers and the spring is too large.

Significant reduction in misfires (02/04/2011)

I was experiencing a 30% misfire rate (6 out of 20) with steel-case ammo in my 7.62x39 custom AR15. Installing this spring helped significantly to reduce misfires.

Heavy Weight Hammer Spring (19/06/2011)

Harder to install because of the heavy spring but works like a champ and something needed for my AR 7.62x39.

Buying another for next build (22/06/2011)

Was having about one out of three "no fires" on my 7.62x39 with steel ammo. This completely cured the problem. Still had a feed problem with all brands of mags, so I alternated brass and steel rounds in my mags, and now all problems gone. Works like it should, no jams or no fires.

Greatly Reduces Lock Time (03/10/2011)

These heavy weight hammer springs greatly reduce lock time in competition rifles. Replace your after market (RRA etc.) hammer spring with one of these. Your scores will go up, especially in off hand!

Great for your .50BMG lower (19/03/2012)

This was exactly what was needed for my lower that I used for a BOHICA .50BMG upper.

Completely fixed my problem! (04/10/2012)

I was having a problem with light strikes when I bought a new upper in 7.62X39. I was using a DPMS lower and some wolf ammo. I know this ammunition has hard primers but my Colt had never had an issue. I replaced the factory spring with this Wolffe heavy weight hammer spring and problem solved!

Reduces lock time. (19/11/2012)

It's physics. If the hammer spring is heavier, the hammer will move more quickly. If you do ANY amount of shooting off-hand/standing/kneeling/sitting (or even prone) past 50 yards, your accuracy will benefit from this hammer spring.

It ever-so-slightly increased the trigger pull on my ALG ACT trigger, but I tried a Tubbs CS trigger spring and a JP reduced-power trigger spring and both combinations brought the trigger pull back down to noticeably lighter than how the trigger came from the factory. The ACT is BUTTER SMOOTH and top-notch. If your trigger is even slightly gritty (most are), you won't even notice a difference in the trigger pull.

I don't have any exact numbers for group sizes, but my group sizes, standing at 50 yards, during my agency's carbine qual shrank considerably when using this hammer spring. The audible 'whack' of the hammer hitting the firing pin/rear of the bolt carrier is noticeably louder using this spring. If your current hammer spring is very worn/weak, you'll even notice the increased strength when you pull on the charging handle.

This also offers insurance against light primer strikes whent he weapon is dirty/fouled. There is no downside. A solid value.

And, it's made from Wolff's proprietary 'rocket wire' steel alloy. They use a special heat-treat process for the metal, after winding the spring. They then coat the surface with a protectant; I've never seen a Wolff spring rust (even when shooting thousands of rounds of corrosive ammo in an AK47/74). It costs more than the el-cheapo parts beacuse YOU'RE GETTING MORE. :)

Fixed CMMG .22LR Conversion Problem (15/05/2013)

I had about 80% of rounds fail to fire using my CMMG .22LR conversion bolt. This spring brought that rate down to around 3%.

Will fix the problem (20/03/2016)

This spring will fix any light strike problem you are having with 7.62x39 AR upper. Tested on many different types of ammo, and none failed to fire after installing. I would also recommend you change out the firing pin to an enhanced firing pin, this combo works.

GOOD PRODUCT, GREAT RESULTS. (03/05/2017)

i HAD PUT TOGETHER AN AR-10 BUT ON A TEST FIRE (USING GERMAN MILITARY SURPLUS AMMO) THE PRIMERS WERE ONLY DIMPLED A BIT. i ORDERED WOLFE HAMMER SPRINGS AND PROBLEM WAS SOLVED. I BOUGHT A COUPLE EXTRA AS BACK UPS OT FOR OTHER FUTURE BUILDS.

SHIPPING WAS ALSO VERY QUICK.

Immediately solved my light strike no pr (23/09/2017)

I built a budget ar and it immediately started misfiring. I put a wolf buffer spring in and this wolf extra strength hammer spring and problem solved. It instantly became completely reliable. No more problems runs like a top.

Lire 16 plus d'avis sur brownells.com

5.3 26.99 3 EUR

Sale

969000100
Hammer Spring
Ref Fabricant: 30093 Ressorts en acier durables, alimentent le marteau supplémentaire pour assurer l'inflammation appropriée avec chaque appui sur la détente. Remplace le printemps de l'usine.

5.3 EUR 50 5,30 € * 7,05 €

En stock

Caractéristiques: Manufacture: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Restrictions d'Achat

Les restrictions à l'exportation américaines ECCN s'appliquent Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.

This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

Caractéristiques

Manufacture: AR-15

Détails de l'article

Fabriqué au USA
ECCN: I(h)

Sale

969000101
Hammer Spring, 3-Pak
Ref Fabricant: 30094 Ressorts en acier durables, alimentent le marteau supplémentaire pour assurer l'inflammation appropriée avec chaque appui sur la détente. Remplace le printemps de l'usine.

12.8 EUR 78 12,80 € * 15,99 €

En stock

Caractéristiques: Manufacture: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Sale

969000102
Hammer Spring, 10-Pak
Ref Fabricant: 30095 Ressorts en acier durables, alimentent le marteau supplémentaire pour assurer l'inflammation appropriée avec chaque appui sur la détente. Remplace le printemps de l'usine.

26.99 EUR 26 26,99 € * 33,49 €

En stock

Caractéristiques: Manufacture: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Aide à élimine les grands de problèmes communs d'allumage lors de l'utilisation de munitions avec des amorces durs

Ressorts en acier durables, alimentent le marteau supplémentaire pour assurer l'inflammation appropriée avec chaque appui sur la détente. Remplace le printemps de l'usine.

Spécifications : acier. Environ 23/32 po (18,2 mm) de large, 2"(5,1 cm) de long.

Plus...

Helps Eliminate Common Ignition Problems Great When Using Ammo With Hard Primers

Durable, steel springs provide extra hammer power to ensure proper ignition with each trigger pull. Replaces factory spring.

SPECS: Steel. Approximately 23/32" (18.2mm) wide, 2" (5.1cm) long.

Plus...

Évaluations client de Hammer Spring

Nombre d'évaluations: 16
De brownells.com: 16
Note moyenne: 4,7

No more Failure to Fire (13/01/2013)

Eliminate Failure to Fire in 7.62x39 upper with TULAmmo, and Chiappa .22 upper with remington ammo. Had Bushmaster lower parts kits. Heavier hammer was not required

Never misfire again (18/04/2016)

Made Improvement (04/07/2017)

Helped out my 7.62x39 upper. Just realize a side effect is that the bolt will be harder to pull back. Enough of difference that my wife and kid complain about it.

AF15 with milsurp 5.45 (11/08/2010)

Does work for AR15 Timney triggers (20/10/2010)

Tried this on my timney trigger after getting light strikes on primers and the spring is too large.

Significant reduction in misfires (02/04/2011)

I was experiencing a 30% misfire rate (6 out of 20) with steel-case ammo in my 7.62x39 custom AR15. Installing this spring helped significantly to reduce misfires.

Heavy Weight Hammer Spring (19/06/2011)

Harder to install because of the heavy spring but works like a champ and something needed for my AR 7.62x39.

Buying another for next build (22/06/2011)

Greatly Reduces Lock Time (03/10/2011)

These heavy weight hammer springs greatly reduce lock time in competition rifles. Replace your after market (RRA etc.) hammer spring with one of these. Your scores will go up, especially in off hand!

Great for your .50BMG lower (19/03/2012)

This was exactly what was needed for my lower that I used for a BOHICA .50BMG upper.

Completely fixed my problem! (04/10/2012)

Reduces lock time. (19/11/2012)

Fixed CMMG .22LR Conversion Problem (15/05/2013)

I had about 80% of rounds fail to fire using my CMMG .22LR conversion bolt. This spring brought that rate down to around 3%.

Will fix the problem (20/03/2016)

GOOD PRODUCT, GREAT RESULTS. (03/05/2017)

Immediately solved my light strike no pr (23/09/2017)

Lire 16 plus d'avis sur brownells.com

Poursuivre vos achats

Sale

17 lb., Light, 1911 Auto, 3-pak
1911 HAMMER SPRING

WOLFF

En stock En stock

8,10 € * 5,80 € - 10,15 €*

(Sélectionnez les articles en vente!)

Ancien prix 10,15 €

Ressorts Marteau

4,4 (7)

S/S pak of 48
1911 ALLEN HEAD GRIP SCREWS

BROWNELLS

La commande sera passée Disponible en pré-commande

19,49 € * 1,90 € - 19,49 €*

Vis Poignée

5 (6)

Sale

M16/M4 Hammer Spring Burst Fire, each
AR-15/M16/M4 HAMMER SPRINGS

BROWNELLS

En stock En stock

1,00 € * 1,00 € - 5,50 €*

(Sélectionnez les articles en vente!)

Ancien prix 1,30 €

Ressorts Marteau

0 (0)

Sale

AR-15 Spring Kit
AR-15 REDUCED POWER SPRING KIT

J P ENTERPRISES

En stock En stock

14,80 € *

Ancien prix 18,49 €

Ressorts Détente

4,7 (69)

Sale

308AR Brush
AR-15/M16/ 308 AR NYLON CHAMBER BRUSH

BROWNELLS

En stock En stock

5,90 € * 5,35 € - 5,90 €*

(Sélectionnez les articles en vente!)

Ancien prix 7,85 €

Brosses Nettoyage de Chambre

3 (2)

Connexion

Mot de passe oublié ?
S'inscrire

Notre garantie - Votre satisfaction.

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous!
Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 90.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.

Nous vous garantissons votre satisfaction à 100% -Toujours!

Votre Equipe Brownells France.

Connectez-Vous

Brownells.fr

Catégories

Commander

Service Clientèle

Bienvenue!

Bienvenue sur brownells.fr, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en France!

La promesse de Brownells France

La promesse de brownells.fr pour nos clients: Votre satisfaction garantie à 100% - Si, pour quelque raison que cela soit, vous n’êtes pas satisfait à 100% du produit que vous avez acheté sur notre site, vous n’aurez qu’à nous le retourner pour obtenir un remboursement ou un échange.

Livraison Gratuite

Chez Brownells.fr la livraison en colissimo suivi est offerte à partir de 200 euros pour les articles en stock (Offre réservée aux particuliers et en France métropolitaine).

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous!

Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Nous vous garantissons votre satisfaction à 100% -Toujours!

* Le prix inclut la TVA mais pas la livraison .

Vue classique

Vue mobile