Votre panier est vide.

Panier

BROWNELLS
MAGAZINE TOOL for GLOCK®

050806109483 080000191

Retire rapidement les talons de chargeur, sans les endommager

Des pinces spécialisées permettent aux propriétaires de Glock de retirer le talon de chargeur des chargeurs d'usine sans érafler ou fissurer le plastique. De petites pointes de sertissage contactent le chargeur précisément au-dessus des languettes de verrouillage. Les manches en acier trempé présentent la courbure géométrique correcte pour éviter la surcompression des parois latérales du chargeur. Une fois comprimé, il suffit de faire glisser le talon de chargeur. Des gaines en caoutchouc assurent une prise en main sûre. Portez une protection oculaire lors du retrait des talons de chargeur.

SPECS: Acier, finition noire. 6" (15.2cm) de long.

Plus...

Removes Base Pads Fast, Without Damage

Specialized pliers allow Glock owners to remove the base pad from factory magazines without gouging or cracking the plastic. Small crimping tips contact the magazine precisely above the locking tabs. Hardened, steel handles feature the correct geometric curvature to prevent over-compression of the magazine sidewalls. Once compressed, simply slide off the base pad. Rubber sleeves provide a positive grip. Wear eye protection when removing magazine base pads.

SPECS: Steel, black finish. 6" (15.2cm) long.

Plus...

Évaluations client de BROWNELLS MAGAZINE TOOL FOR GLOCK

Nombre d'évaluations: 16
De brownells.com: 16
Note moyenne: 2,5

Don't buy it (20/10/2009)

This thing is junk. Perhaps I am using it incorrectly, but I doubt it. I've experimented with it many times but I still haven't been able to find a way to get it to help with removing the magazine floor plate. To top it off, the plastic on the handles is always slipping off and needs to be adjusted. Save your money. Don't buy this.

Good enough for me (03/12/2009)

I have used this product on over 30 different Glock magazines. Using it for maintenance purposes or just changing out base plates. Rubber handle slips off, but glue fixes that.
The trick to using these is to grab the mag with this tool, then with a punch, push down on internals of mag, then compress with tool.
Regular pliers will work for doing this, but will scratch the magazines up.

Don't waste your money (15/07/2010)

Don't waste your money on this. Nice concept, but using the Glock tool (or similar) and pinching in on the mag body with your fingers is much, much easier than fumbling with this tool.

It is, what it is......A Tool, (07/08/2010)

When I attended the Glock Armorer's Course, I was taught to take a pin punch and quickly and sharply push the magazine insert down into the mag and it will stay down. (right hand dexterity)
Hold the mag (inverted)in your left hand with your thumb on the rear of the mag base pad. With the mag tool in r-hand tool tips on the mag tabs, compress only enough and push with left thumb on pad. Continue to slowly increase pressure with tool and continue to push with thumb until base pad slides forward. I disassemble them that way, and I have NO COMPLAINT, NO DAMAGE. The tool works well. As far as the handles plastic sleeves,as someone else said,glue them.

Waste of money! (24/03/2011)

This tool mars mag sides by not being padded in the jaws. Better results can be realized by using the glock tool on the floorplate button and tapping the rear ofthe floorplate with a rubber mallet!!!

Worth the $$$ (09/12/2012)

Makes a "3 handed" job quick and easy. Base plates just slide right off. No marking to mag body if you watch what you are doing. Don't know why I did not get one sooner.. Yes, the rubber grips need a shot of glue to stay in place. Was a 2 sec fix. For the low price, it's worth it to have one, even if you only use it a few times a year to clean your mags..

No use (13/12/2012)

Did not work well. Waste.

Laughably useless. (19/07/2014)

Totally ineffective for a human with two hands. Instead, buy the GTUL. Used in a vise, the GTUL is MARGINALLY useful. This tool is nicely made, I might find another use for it, but as a Glock magazine tool it is of no value.

Works as intended (27/08/2014)

I don't understand how anyone would have a problem using this tool.

Firmly punch the insert down, it will roll over the spring into the front of the mag. Squeeze the sides of the mag under the locking tabs with the tool, slide the base plate off. Couldn't be easier.

For the price I expected a higher quality tool, so it loses a star.

Worth it's weight in scrap metal (26/12/2015)

Totally useless. Worth about half its weight in scrap metal. I can't believe Brownells even sells such a useless piece of junk. Save your money and buy a cheap gooseneck plier.

nice concept but bad tool (23/02/2016)

Good concept but really very very cheaply made. Sending back for credit.

Not recommended.

Yes, Right Tool for the Job (16/05/2016)

Hi, I had problems with Glock magazine take down. This was do to old age, arthritis, etc. This tool worked as advertised. Just line up the "nubs" on the magazine body and gently squeeze,works like a charm. Also works on the new Glock 43 magazines.

with some know how works great (25/08/2016)

If you know how to use it, it works great. If you squeeze the mag in just the right place with a punch in the base plat it works. I would recomend puting a a bit of supper glue on the grips to get them to stay on.

Glock Magazine Tool (04/09/2016)

I put off getting this tool for a long time because of the price but broke down and got one. They work and are easy to use. The Glock owner's guide says you can pinch the magazines but I couldn't without this tool. At last I can clean these 25 year old mags.

Waste of money (28/02/2017)

Cheap junk, stay away from.

Overpriced (06/10/2018)

It will make removing the base plate off of a Glock magazine easier, but for the price I would expect a higher quality product. I feel this should be at a $10.00 - $12.00 price point.

Lire 16 plus d'avis sur brownells.com

36.9 36.9 1 EUR

Référence: 080000191
BROWNELLS MAGAZINE TOOL FOR GLOCK 050806109483 Des pinces spécialisées permettent aux propriétaires de Glock de retirer le talon de chargeur des chargeurs d'usine sans érafler ou fissurer le plastique. De petites pointes de sertissage contactent le chargeur précisément au-dessus des languettes de verrouillage. Les manches en acier trempé présentent la courbure géométrique correcte pour éviter la surcompression des parois latérales du chargeur. Une fois comprimé, il suffit de faire glisser le talon de chargeur. Des gaines en caoutchouc assurent une prise en main sûre. Portez une protection oculaire lors du retrait des talons de chargeur.

36.9 EUR 28 36,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Fabrication: Glock Modèle: Universal Handguns

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Fabrication: Glock Modèle: Universal Handguns Poids du colis: 0,068kg Hauteur d'expédition: 10mm Largeur d'expédition: 81mm Longueur d'expédition: 246mm

Détails de l'article

Fabriqué au USA

Retire rapidement les talons de chargeur, sans les endommager

SPECS: Acier, finition noire. 6" (15.2cm) de long.

Plus...

Removes Base Pads Fast, Without Damage

SPECS: Steel, black finish. 6" (15.2cm) long.

Plus...

Évaluations client de BROWNELLS MAGAZINE TOOL FOR GLOCK

Nombre d'évaluations: 16
De brownells.com: 16
Note moyenne: 2,5

Don't buy it (20/10/2009)

Good enough for me (03/12/2009)

Don't waste your money (15/07/2010)

Don't waste your money on this. Nice concept, but using the Glock tool (or similar) and pinching in on the mag body with your fingers is much, much easier than fumbling with this tool.

It is, what it is......A Tool, (07/08/2010)

Waste of money! (24/03/2011)

This tool mars mag sides by not being padded in the jaws. Better results can be realized by using the glock tool on the floorplate button and tapping the rear ofthe floorplate with a rubber mallet!!!

Worth the $$$ (09/12/2012)

No use (13/12/2012)

Did not work well. Waste.

Laughably useless. (19/07/2014)

Works as intended (27/08/2014)

Worth it's weight in scrap metal (26/12/2015)

Totally useless. Worth about half its weight in scrap metal. I can't believe Brownells even sells such a useless piece of junk. Save your money and buy a cheap gooseneck plier.

nice concept but bad tool (23/02/2016)

Good concept but really very very cheaply made. Sending back for credit.

Not recommended.

Yes, Right Tool for the Job (16/05/2016)

with some know how works great (25/08/2016)

Glock Magazine Tool (04/09/2016)

Waste of money (28/02/2017)

Cheap junk, stay away from.

Overpriced (06/10/2018)

It will make removing the base plate off of a Glock magazine easier, but for the price I would expect a higher quality product. I feel this should be at a $10.00 - $12.00 price point.

Lire 16 plus d'avis sur brownells.com

Poursuivre vos achats

BIRCHWOOD CASEY B/C SHOOT NC 1 ROUND - 432 PIECES
SHOOT-N-C TARGETS

BIRCHWOOD CASEY

Bientôt disponible

13,90 € *

Cibles Papier

3 BUCC INC. AR-15/308AR FLAT TOP BRASS CATCHER BLACK
AR-15/M16 BRASS-SAVR BRASS CATCHER

3 BUCC INC.

En stock

134,90 € *

Collecteurs de Douilles & Déflecteurs

4,1

MAGPUL LADDER RAIL PANEL PICATINNY POLYMER BLACK 7"
AR-15 PICATINNY LADDER RAIL PANEL POLYMER

MAGPUL

En stock

19,90 € *

WILSON COMBAT AR-15 A2 BIRDCAGE FLASH HIDER 5.56 NATO
AR-15 A2 BIRDCAGE FLASH HIDER 5.56 NATO

WILSON COMBAT

En stock

22,90 € *

Caches Flamme

BROWNELLS 308AR NYLON HEAVY WEIGHT CHAMBER BRUSH 8-36 THREADS
AR-15/M16/ 308 AR NYLON CHAMBER BRUSH

BROWNELLS

En stock

13,90 € * 13,90 € - 16,90 €*

Brosses Nettoyage de Chambre

Connexion

Mot de passe oublié ?
S'inscrire

Notre garantie - Votre satisfaction.

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous!
Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 90.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.

Nous vous garantissons votre satisfaction à 100% -Toujours!

Votre Equipe Brownells France.

Connectez-Vous

Brownells.fr

Catégories

Commander

Service Clientèle

Notre identité

Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.