Votre panier est vide.

Panier

11-87 TRIGGER FIX

081950008704 883000022

Pour une détente légère, douce et ajustable

Ce kit prêt à installer remplace la détente et le ressort d'origine par un mécanisme plus doux, plus léger et entièrement ajustable, qui aide à tirer avec plus de précision. Livré avec trois ressorts de poids différents pour réduire la lourdeur de la détente d'usine à une traction confortable de 2, 3 ou 4 lb, puis à affiner le réglage avec la vis d'ajustement en utilisant la clé hexagonale fournie. Les ressorts sont codés par couleur pour une identification facile.

SPECS: Détente en acier. Comprend des ressorts de 2 lb (bleu), 3 lb (blanc) et 4 lb (rouge), ainsi qu'une clé hexagonale. Compatible avec les fusils de chasse Remington 870, 1100 et 11-87, tous calibres. Convient également aux carabines 740, 742, 760, 7400 et 7600.

Plus...

For A Light, Smooth, Adjustable Trigger Pull

Drop-in kit replaces original factory sear and spring for a smoother, lighter, fully adjustable trigger pull that helps you shoot more accurately. Comes with three different weight springs to lower the heavy factory trigger pull to a comfortable 2, 3, or 4 lbs., then fine-tune the pull with the adjustment screw using the included hex-head wrench. Springs are color-coded for easy identification.

SPECS: Steel sear. Includes 2 lb. (blue), 3 lb. (white), and 4 lb. (red) springs, plus hex-head wrench. Fits Remington 870, 1100, and 11-87 shotguns, all gauges. Also fits 740, 742, 760, 7400, and 7600 rifles.

Plus...

Évaluations client de TIMNEY REM 870 TRIGGER FIX

Nombre d'évaluations: 18
De brownells.com: 18
Note moyenne: 4,9

110% Improvement. (12/03/2011)

First let me say that I NEVER leave comments unless a product is just superb or really poor. As a diehard hunter, novice triggersmith and degreed Mechanical Engineer I can confidently say that this product improved the trigger on my 11-87 20ga Compact 110%.

This is my wife's turkey gun. At 20 yards or less my patterns are baseball sized. Pulling off of a gobbler's head with the creepy/heavy stock trigger is a lot easier then one would imagine.

Install was fairly simple and took about 15 mins. The 2 lb spring only got me down to 2 lb 7 oz and there is a little creep left in the group, but not much...BUT overall the trigger improvement is excellent. No...it's not your "break like glass" 24 oz deer rifle's trigger, but it is one of the best improvements you can make to your Remington 870/1100/11-87.

Also, it is not too light that you would not want to shoot passing targets with either (doves, clay targets, etc.)

Great improvement over factory (10/06/2011)

Factory pull was 6.5 lbs, after install with the "medium" spring it was now 3.5 lbs. Haven't shot gun yet, but if there is a problem then I will repost.

Good instructions also!

Bad trigger fixed (17/10/2011)

Took about 40 minutes to install. Completely fixed the creep and tough let off of the Rem 11-87 shotgun. The trigger is now as good as the best shotguns. You gotta try it.

Great product! (08/11/2011)

This is awsome!! If you are a slug gun shooter this is a must have!!

Easy install on 1100 (03/02/2012)

It took less than 20 minutes to install. Trigger is great. I put it in my 1100 used for 3-gun matches. I don't have a trigger pull scale, but it feels about the same as my AR Gold trigger in my AR15.

great products (08/03/2012)

i put this trigger in my remington 870 magnum express slugger,and put the smooter spring incredible i took 20 minutes to install and now the shoot is very easy great a+

I would buy this product again and again (09/03/2012)

great,easy installation 20-30 minutes and what a great smooth trigger,i put in my remington 870 magnum express 12 ga slugger and i put the smooter spring,and when i shout the new precision is there

good fix (05/12/2012)

A great improvement too my 760 pump rifle,easy to install with good instructions in the kit.Gave the old rifle a great trigger not a break like glass trigger but one that sure is a lot better than the one that came in the weapon

Wow! (05/12/2012)

2lb trigger? Yes please. So smooth. Easy to install

Great upgrade (11/12/2012)

I installed this sear on a Remington 7600 using the 3# spring. Considerably less creep and much smoother trigger pull. Also, it reduced the trigger pull weight from 6# to a acceptable 3# which makes the rifle group like it should.

a world of difference (30/12/2013)

This was super easy to install and has a lot less creep compared to the standard! Breaks like glass

Everything You'd Expect from Timney (06/03/2014)

I've become a trigger snob. All of my guns have Geissele or Timney so I figured I'd upgrade my 870 tactical. Pre - install the stock trigger wasn't too shabby at around 4.5 lbs. Post install 2.25lbs! Easy install and the trigger is insanely smooth. Do yourself a favor while you have the trigger group out go ahead and upgrade your extractor to non - mim and replace your latch spring with the police version. Brownell has both parts

Not without a silver bullet! (31/07/2015)

Installing without the silver bullet is very awkward. Very easy with it. Trigger pull on my new 20 gauge Remington 870 is no longer a "pull". Amazing difference. Suggest you slip spring over top adjustment screw first and then push bottom in place. That way if bottom slips off it does not spring to the other side of the room. I had never removed or altered a trigger assembly before this. Difficult to read paper directions, but easy process. Suggest you take a picture of the assembly before taking it apart.

Great: Feels like I am just pointing with the trigger finger and saying "here" . Twenty to 40 yards aim is staying right on squirrel and patterns on paper target are all clustered around aim point. Makes me a much better shooter :-)

WOW (23/08/2015)

Started with a 5.5 lb. pull installed the 2 lb. spring and can't believe the difference. It's a nice addition to my slug gun. I struggled a bit with the re-assemble but managed to get it back together correctly. Shot it today and no more flinching from the stiff trigger pull just a smooth snap.

Works great as advertised! (17/10/2015)

Purchased Remington 7600 last year and trigger was terrible. Looking at various options and came across this trigger fix for the 870 and also works 7600. Don't know what trigger assembly looks like for older 870/7600 but mine different than what is in instructions. In a nutshell you need small punch to remove the shear pin (very small opening), don't be afraid to use it. Popped out shear pin and installed new parts, works great, what a difference! Can't wait to see results on paper at range....groups have to improve.

Significant Improvement (19/02/2016)

Provided a signicant improvement in model 7600 pump action rifle. Easy to install but instructions could be improved. Most of the photos were to dark to show required detail. The configuration of my trigger differs slightly from photos and instructions.

870 Timney - easy to install (27/09/2016)

The standard trigger in my 870 was 5.5 lbs on RCBS gauge and made longer shots (100+ yds) difficult to consider with any confidence. I found a video on You Tube that was outstanding with step by step visual detail that made the trigger swap extremely easy to do. The swap out of the Timney in my 870 did not take more than 10 minutes once I had the trigger assembly removed from the receiver. The trigger pull after installation using the blue spring was a very nice 2.25 lbs. Headed to range today to hopefully see better groups at 100+. The trigger pull went from hard rough pull to a very nice crisp break. What more can you ask for? The link for the video:

https://www.youtube.com/watch?v=yh8cFmWc78s.

Just believe the hype... (12/05/2018)

I NEVER write these. I have been really surprised a couple times this was one. It cleaned up the break significantly & has a better reset. I think itâd be easier on a newer trigger group; I had a older steel Police model however it was done in under a hour. Itâs utilized on a 870 I use for hone defense. If the funds & desire is there, go for it! I surprisingly donât regret it, like my Gieselle.

<img width="500" src='/userdocs/reviewimages/f01f3b83-f7c6-445b-8c8c-7fb6629bd7ea.jpg' alt=''>

Lire 18 plus d'avis sur brownells.com

214.9 214.9 1 EUR

Référence: 883000022
TIMNEY REM 870 TRIGGER FIX
Ref Fabricant: 870 081950008704 Ce kit prêt à installer remplace la détente et le ressort d'origine par un mécanisme plus doux, plus léger et entièrement ajustable, qui aide à tirer avec plus de précision. Livré avec trois ressorts de poids différents pour réduire la lourdeur de la détente d'usine à une traction confortable de 2, 3 ou 4 lb, puis à affiner le réglage avec la vis d'ajustement en utilisant la clé hexagonale fournie. Les ressorts sont codés par couleur pour une identification facile.

214.9 EUR 82 214,90 € *

Délai de livraison environ 14-21 jours.
More than 10 pcs. in USA warehouse

Caractéristiques: Fabrication: Remington Modèle: 11-87, 1100, 870, 7600, 7400, 760, 740, 742

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Fabrication: Remington Modèle: 11-87,1100,740,7400,742,760,7600,870 Poids du colis: 0,018kg Hauteur d'expédition: 10mm Largeur d'expédition: 79mm Longueur d'expédition: 107mm

Détails de l'article

Fabriqué au USA

Pour une détente légère, douce et ajustable

Plus...

For A Light, Smooth, Adjustable Trigger Pull

Plus...

Évaluations client de TIMNEY REM 870 TRIGGER FIX

Nombre d'évaluations: 18
De brownells.com: 18
Note moyenne: 4,9

110% Improvement. (12/03/2011)

Great improvement over factory (10/06/2011)

Factory pull was 6.5 lbs, after install with the "medium" spring it was now 3.5 lbs. Haven't shot gun yet, but if there is a problem then I will repost.

Good instructions also!

Bad trigger fixed (17/10/2011)

Took about 40 minutes to install. Completely fixed the creep and tough let off of the Rem 11-87 shotgun. The trigger is now as good as the best shotguns. You gotta try it.

Great product! (08/11/2011)

This is awsome!! If you are a slug gun shooter this is a must have!!

Easy install on 1100 (03/02/2012)

It took less than 20 minutes to install. Trigger is great. I put it in my 1100 used for 3-gun matches. I don't have a trigger pull scale, but it feels about the same as my AR Gold trigger in my AR15.

great products (08/03/2012)

i put this trigger in my remington 870 magnum express slugger,and put the smooter spring incredible i took 20 minutes to install and now the shoot is very easy great a+

I would buy this product again and again (09/03/2012)

great,easy installation 20-30 minutes and what a great smooth trigger,i put in my remington 870 magnum express 12 ga slugger and i put the smooter spring,and when i shout the new precision is there

good fix (05/12/2012)

Wow! (05/12/2012)

2lb trigger? Yes please. So smooth. Easy to install

Great upgrade (11/12/2012)

a world of difference (30/12/2013)

This was super easy to install and has a lot less creep compared to the standard! Breaks like glass

Everything You'd Expect from Timney (06/03/2014)

Not without a silver bullet! (31/07/2015)

WOW (23/08/2015)

Works great as advertised! (17/10/2015)

Significant Improvement (19/02/2016)

870 Timney - easy to install (27/09/2016)

Just believe the hype... (12/05/2018)

Lire 18 plus d'avis sur brownells.com

Poursuivre vos achats

MESA TACTICAL PRODUCTS URBINO BUTTSTOCK, BENELLI M4/M1014
URBINO TACTICAL SHOTGUN BUTTSTOCKS

MESA TACTICAL PRODUCTS

Bientôt disponible

229,90 € * 229,90 € - 274,90 €*

Crosses

LYMAN FITS MOSSBERG 500, 4 RNDS, 12 GA
SIDE SADDLE SHELL HOLDER

LYMAN

En stock

54,90 € * 54,90 € - 64,90 €*

Porte cartouches fusil

3,6

FORSTER PRODUCTS, INC. 22 LONG RIFLE GO GAUGE
HEADSPACE GAUGES

FORSTER PRODUCTS, INC.

Bientôt disponible

49,90 € * 46,90 € - 59,90 €*

Jauges espace libre | Outils de Jaugage

3,9

WOLFF EXTRA POWER 18-1/2 LB. CS RECOIL SPRING
1911 CHROME SILICON RECOIL SPRING

WOLFF

En stock

13,90 € *

Ressorts Anti-Recul

4,8

YANKEE HILL MACHINE CO., INC. 7/8" FOREARM END CAP ALUMINUM BLACK
AR-15 15/16" FOREARM END CAP ALUMINUM BLACK

YANKEE HILL MACHINE CO., INC.

Non disponible

Bouchons Garde-Main

4,7

Connexion

Mot de passe oublié ?
S'inscrire

Notre garantie - Votre satisfaction.

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous!
Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 90.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.

Nous vous garantissons votre satisfaction à 100% -Toujours!

Votre Equipe Brownells France.

Connectez-Vous

Brownells.fr

Catégories

Commander

Service Clientèle

Notre identité

Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.