Votre panier est vide.

Panier

MAGPUL
SCAR SELECTOR SET

873750004990 100007108

Sélecteurs ambidextres pour la famille fn SCAR Compatibles avec les modèles militaires MK16 & MK17 Compatibles avec les SCAR 16s & 17s semi-automatiques Remplacement direct des sélecteurs OEM Aucune modification permanente de l'arme nécessaire Installation simple en utilisant la vis existante

Plus...

Drop-in, dual sided selectors for fn SCAR family Compatible w/ military MK16 & MK17 Compatible with semi-auto scar 16s & 17s Direct replacement of OEM selectors Requires no permanent modification to weapon Simple install using existing screw

Plus...

Évaluations client de MAGPUL SCAR SELECTOR SET

Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4,3

Not mandatory for the SCAR (23/09/2011)

Magpul SSG â FN SCAR Safety Selector

My biggest complaint about the original factory FN SCAR safety selector is that the lever is too short, and combined with a stiff mechanical assembly, it makes it difficult to switch back to SAFE mode. The SSG is advertised as being developed due to a request by a deploying unit. However, I found that the SSG attempts to offer an AR15/M16/M4-style lever without quite achieving the goal.

The SSG quality is exceptional, it is a fairly tight fit on the safety mechanism and the factory stainless dowel screws fit the threads perfectly. However, the screws are inserted in the opposite direction from my original 16S design. I am concerned the screws could back out since they are now inverted. The only thing I'd change about the design is to make both right and left side levers the same length, which should be a few millimeters longer than what is currently offered. This extra leverage would make it easier to use.

Overall: 4/5 stars, good quality, but not quite a mandatory accessory/modification for the SCAR.

Great idea, but not a must-have (23/09/2011)

My biggest complaint about the original factory FN SCAR safety selector is that the lever is too short, and combined with a stiff mechanical assembly, it makes it difficult to switch back to SAFE mode. The SSG is advertised as being developed due to a request by a deploying unit. However, I found that the SSG attempts to offer an AR15/M16/M4-style lever without quite achieving the goal.

The SSG quality is exceptional, it is a fairly tight fit on the safety mechanism and the factory stainless dowel screws fit the threads perfectly. However, the screws are inserted in the opposite direction from my original 16S design. I am concerned the screws could back out since they are now inverted. The only thing I'd change about the design is to make both right and left side levers the same length, which should be a few millimeters longer than what is currently offered. This extra leverage would make it easier to use.

Overall: 4/5 stars, good quality, but not quite a mandatory accessory/modification for the SCAR.

Problem/Solution (25/01/2012)

Problem: The factory manufactures the rifle with two diffrent sizes of selector levers. I like them both to be the same size and I prefer the longer levers.
Solution: I ordered a set and mounted the long lever. Then I had a factory lever and an aftermarket lever. So I ordered a second set and installed the long lever on the other side. In hind sight I should have ordered a second long lever from FN. Oh well, what can I say. Either way I like the levers. The fit and finish is excellent.

EXCELLENT addition, minor fitting needed (02/11/2012)

THese switches are an excellent addition to your SCAR.
A primary issue of concern with the SCAR is the difficulty in employing the stock switches with one hand, especially with regard to Real-World use, and dynamic relaod drills. The stock switches ar fairoly stiff, and VERY difficult to properly enage with one hand (i.e. the FIRING Hand.)
These simple levers GREATLY Assist with this problem. Their grip ridges, as well as their greater length, offer better tactile input, as well as SIGNIFICANTLY greater leverage and ease of fire control employment by their user. I would say that they alleviate 85-90% of the stock issue. Additionaly, they look and feel great.

Cons:
in order to properly fit them, I had to drill the stock screw hole all the way through. THis offered me better fitment and snag free employment. This was a relatively minor issue, and was strictly based on personal preference. IN order to accomplish this, simply take a small drill bit, and run it through the exiting screw hole until it comes out the other side.

Overall:
a SIMPLE, EASY, CHEAP upgrade. WELL WORTH IT

Lire 4 plus d'avis sur brownells.com

26.9 26.9 1 EUR

Référence: 100007108
MAGPUL SCAR SELECTOR SET
Ref Fabricant: MAG499-BLK 873750004990 Sélecteurs ambidextres pour la famille fn SCAR Compatibles avec les modèles militaires MK16 & MK17 Compatibles avec les SCAR 16s & 17s semi-automatiques Remplacement direct des sélecteurs OEM Aucune modification permanente de l'arme nécessaire Installation simple en utilisant la vis existante

26.9 EUR 24 26,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Fabrication: FN Modèle: SCAR

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Fabrication: FN Modèle: SCAR Poids du colis: 0,023kg Hauteur d'expédition: 10mm Largeur d'expédition: 108mm Longueur d'expédition: 191mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

Plus...

Évaluations client de MAGPUL SCAR SELECTOR SET

Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4,3

Not mandatory for the SCAR (23/09/2011)

Great idea, but not a must-have (23/09/2011)

Problem/Solution (25/01/2012)

EXCELLENT addition, minor fitting needed (02/11/2012)

Lire 4 plus d'avis sur brownells.com

Poursuivre vos achats

A-ZOOM 7MM-08 REMINGTON SNAP CAPS 2/PACK
AMMO SNAP CAP DUMMY ROUNDS

A-ZOOM

Bientôt disponible

19,90 € * 14,90 € - 45,90 €*

Cartouches Factices

4,2

BRAVO COMPANY GUNFIGHTER TRIGGER GUARD, MOD 0, BLACK
AR-15 BCMGUNFIGHTER™ TRIGGER GUARD MOD-0

BRAVO COMPANY

En stock

13,90 € *

Pontets

KINETIC DEVELOPMENT GROUP FN ADAPTABLE STOCK FOLDING BROWN
FN SCAR 16 ADAPTABLE STOCK FOLDING

KINETIC DEVELOPMENT GROUP

Non disponible

439,90 € *

Buttstocks

TRIPLE-K .30 M1 CARBINE, 5 CAPS PER PAK
DELUXE SNAP CAPS DUMMY ROUNDS

TRIPLE-K

En stock

28,90 € * 15,90 € - 29,90 €*

Cartouches Factices

2,8

KINETIC DEVELOPMENT GROUP SCAR AMBIDEXTROUS CHARGING HANDLE, BLACK
FN SCAR CHARGING HANDLE

KINETIC DEVELOPMENT GROUP

En stock

89,90 € * 89,90 € - 99,90 €*

Poignées de Chargement

Connexion

Mot de passe oublié ?
S'inscrire

Notre garantie - Votre satisfaction.

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous!
Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 90.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.

Nous vous garantissons votre satisfaction à 100% -Toujours!

Votre Equipe Brownells France.

Connectez-Vous

Brownells.fr

Catégories

Commander

Service Clientèle

Notre identité

Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.

* Le prix inclut la TVA mais pas la livraison .

Vue classique

Vue mobile