Votre panier est vide.

Panier

BROWNELLS SHOTGUN BUTTSTOCK BOLT BITS

1100 Buttstock Bolt Bit

Traduction automatique (Description - Fabricant): 1100 crosse boulon Plus...

Référence: 080187201 080187201

Aucun bit Wedge pour 3/8" Drive Tools ; Pour Remington 870 & 1100

Autoguidés, à manches des morceaux parfaitement Remington 870 et buttstocks 1100 ; ne peut coincer entre bois et boulon de stock. Utiliser avec extension 6" long 3/8" drive et poignée en T énumérés ci-dessous.

Spécifications : 870 est ¾ po (19 mm) diamètre x 1½ po (3,8 cm) long. 1100 est 7/8"(22,2 mm) de diamètre x 1-5/8" (4,1 cm) long.

Plus...

No Wedge Bits For 3/8" Drive Tools; For Remington 870 & 1100

Self-guiding, sleeved bits fit Remington 870 and 1100 buttstocks perfectly; can't wedge between stock bolt and wood. Use with 6" long 3/8" drive extension and T-handle listed below.

SPECS: 870 is ¾" (19.0mm) diameter x 1½" (3.8cm) long. 1100 is 7/8" (22.2mm) diameter x 1-5/8" (4.1cm) long.

Plus...

Évaluations client de 1100 Buttstock Bolt Bit

Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 5

Worth the money (22/10/2016)

I wanted to replace the stock on my 870. To remove the stock bolt I tried screwdrivers, WD40, penetrating oil all to no avail. Bought this bit and the stock bolt came loose in moments. Still required significant effort, but it came loose. just to be sure the bolt bit was the right tool, I tried the screwdriver again before using the bolt bit and the bolt wouldn't budge. Buying this bit actually was a net cost savings to me because the only other option was to cut the stock off and even then there is no guarantee that the remainder of the bolt would have been easy to remove. Buy this bit and simplify your life.

Built tough great tool (30/09/2009)

Had a rusted up Remington 1100 that had broken two other wrenches of less quality, was running through all my normal methods of removing the rusted nut when I spotted this wrench in the catalog so I ordered it up, [...] took it out of the box, put it on a breaker bar and "POP" off came the nut! Great tool!

A "No Brainer" Purchase (02/12/2009)

I was wrestling with various screwdrivers and other Heath Robinson-esque devices to try to get my stuck 11-87 bolt off with zero success. I eventually caved and bought this. The stock was off within 5 seconds of unwrapping the parcel from Brownells. Just get it.

Just Buy It (30/04/2010)

So Here's the story: I have a 1980 model 1100 with a weak and noisy action spring. Additionally the butt stock was loose, could be just that or broken. Sought advise as to the best way to remove the nut and was told about the many different tools to get the job done. Ranging from a wide blade screwdriver to a wood boring bit.

Two things you must have to remove the stock safely and properly: 1. The ability to apply the proper amount of torque, both tightening and loosening. 2. The ability to keep the tool from slipping out of the slot stripping the nut and/or breaking the stock. This tool does both; in fact it is the only tool that does both.

Turns out the stock was just loose and the spring was kinked and worn out. The weekend after fixing my gun, a club buddy asked if I bought this bit. He wanted to borrow it because he had used a screwdriver on his, slipped and took a huge chunk out of the inside of his stock.

" Fantastic piece of equipment " (02/07/2012)

I used this tool to remove an old stubborn disfigured stock nut from my 1100. Proved to be fast, safe and left my stock damage free, I highly suggest this tool as the price for the outcome is " priceless "!

Excellent tool (07/05/2013)

If you own or work on Remington 1100's you must have this tool. Don't risk punching a hole through the stock for the small price of this excellent product. You will never get the bolt tight enough with a screwdriver and the stock will continue to come loose, usually in the middle of a hunting trip or a day shooting clays. Just buy it, it is worth every penny.

Socket Really Works (20/12/2013)

Have been trying all things I have read online to remove bolt. Screw Driver, Lug Wrench PB Blaster. Tried all with no success. Ordered the bit and tried it today. Had a rusted bolt probably from 30 years ago. Put the bit on and had the bolt off in a minute flat. No fuss no problems. If you can turn it with a big screw driver you don't need this. If you can't I would buy this bit. It is cheaper than a gun smith and you have it from now on. Is a bit pricy but have you checked other tool prices lately.
This was for a 70's model 1100 magnum that has been babtized numerous times especially on New Years for the past two years in a row.

Works like a charm! (20/08/2015)

I recently purchased this bit to change the buttstock on my 11-87 LC High Gloss. Ordering was a breeze, customer service was very helpful, and the bit arrived 4 business days after I placed the order. Once the bit arrived, it functioned exactly as expected. I was able to remove the old stock and install the new one with no problems at all. I'd definitely recommend this to anyone who needs to remove the buttstock on a Remington 11-87, and based on this experience, I won't hesitate to order from Brownell's in the future.

Right tool for the job (09/12/2015)

Made short work of removing the butt retaining bolt without fear of damaging my expensive Monte Carlo buttstock. The right tool for job which could save you a lot of money in the long run. Get it and throw it in your maintance kit. You'll need it again if your a regular 1100 shooter.

Buy this tool. (07/05/2018)

Great tool. the only method that worked.

Lire 10 plus d'avis sur brownells.com

31.99 33.49 2 EUR

Sale

080187201
1100 Buttstock Bolt Bit 1100 crosse boulon Bit

33.49 EUR 2 33,49 € * 37,99 €

En stock

Caractéristiques: Manufacture: Remington Modèle: 1100

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Description

1100 crosse boulon Bit

Caractéristiques

Manufacture: Remington Modèle: 1100

Détails de l'article

Fabriqué au USA

Sale

080870201
870 Buttstock Bolt Bit
Ref Fabricant: 870STOCKBIT 870 crosse boulon Bit

31.99 EUR 16 31,99 € * 35,99 €

En stock

Caractéristiques: Manufacture: Remington Modèle: 870

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Aucun bit Wedge pour 3/8" Drive Tools ; Pour Remington 870 & 1100

Spécifications : 870 est ¾ po (19 mm) diamètre x 1½ po (3,8 cm) long. 1100 est 7/8"(22,2 mm) de diamètre x 1-5/8" (4,1 cm) long.

Plus...

No Wedge Bits For 3/8" Drive Tools; For Remington 870 & 1100

Self-guiding, sleeved bits fit Remington 870 and 1100 buttstocks perfectly; can't wedge between stock bolt and wood. Use with 6" long 3/8" drive extension and T-handle listed below.

SPECS: 870 is ¾" (19.0mm) diameter x 1½" (3.8cm) long. 1100 is 7/8" (22.2mm) diameter x 1-5/8" (4.1cm) long.

Plus...

Évaluations client de 1100 Buttstock Bolt Bit

Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 5

Worth the money (22/10/2016)

Built tough great tool (30/09/2009)

A "No Brainer" Purchase (02/12/2009)

Just Buy It (30/04/2010)

" Fantastic piece of equipment " (02/07/2012)

Excellent tool (07/05/2013)

Socket Really Works (20/12/2013)

Works like a charm! (20/08/2015)

Right tool for the job (09/12/2015)

Buy this tool. (07/05/2018)

Great tool. the only method that worked.

Lire 10 plus d'avis sur brownells.com

Poursuivre vos achats

Sale

Remington 870/11-87 12 Gauge Follower, Stainless
REMINGTON 870/11-87 12GA STAINLESS STEEL FOLLOWER

VANG COMP SYSTEMS

En stock En stock

16,99 € *

Ancien prix 18,99 €

4,9 (10)

Sale

Remington 870 Magazine Follower, 12 Ga.
REMINGTON 870 TACTICAL RESPONSE MAGAZINE FOLLOWER

SCATTERGUN TECHNOLOGY

En stock En stock

11,75 € *

Ancien prix 13,35 €

3,6 (8)

Connexion

Mot de passe oublié ?
S'inscrire

Notre garantie - Votre satisfaction.

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous!
Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 90.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.

Nous vous garantissons votre satisfaction à 100% -Toujours!

Votre Equipe Brownells France.

Connectez-Vous

Brownells.fr

Catégories

Commander

Service Clientèle

Bienvenue!

Bienvenue sur brownells.fr, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en France!

La promesse de Brownells France

La promesse de brownells.fr pour nos clients: Votre satisfaction garantie à 100% - Si, pour quelque raison que cela soit, vous n’êtes pas satisfait à 100% du produit que vous avez acheté sur notre site, vous n’aurez qu’à nous le retourner pour obtenir un remboursement ou un échange.

Livraison Gratuite

Chez Brownells.fr la livraison en colissimo suivi est offerte à partir de 200 euros pour les articles en stock (Offre réservée aux particuliers et en France métropolitaine).

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous!

Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Nous vous garantissons votre satisfaction à 100% -Toujours!

* Le prix inclut la TVA mais pas la livraison .

Vue classique

Vue mobile