Améliore ton tir avec le montage de viseur SIG SAUER P210A TARGET VORTEX VIPER/VENOM !
Découvre le montage de viseur EGW, conçu pour les amateurs de tir qui souhaitent optimiser leur précision. Voici les détails :
Description du produit
- Matériau : Aluminium 7075
- Revêtement : Matte Black Hardcoat
- Longueur totale : 1.811"
- Largeur totale : .99"
- Matériel de montage :
- (2) Vis à tête ronde 6-32
- (2) Vis à tête plate 6-32
- (1) Vis de réglage 6-32
- Compatibilité des points rouges : Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter.
- CONVIENT À : Sig P210 Target (Américain uniquement après 2016)
Les viseurs à point rouge EGW sont conçus pour être installés de gauche à droite (avec le canon orienté vers l’avant). La queue d’aronde a un taper progressif pour faciliter l’installation. Il te suffit de retirer le viseur arrière de ton arme et de le remplacer par notre montage pour installer ton Vortex Viper/Venom, Burris FastFire ou viseur Docter. Aucune modification n’est requise. Tu peux retirer notre montage et remplacer ton viseur arrière à tout moment. Matériel de montage inclus.
Instructions d'installation
- Retire le viseur arrière
- Installe le montage de viseur EGW dans la queue d'aronde
- Serre la vis de réglage (si applicable)
- Place le viseur à point rouge sur le montage EGW (placer un petit morceau de papier entre le viseur à point rouge et le montage facilitera le retrait et empêchera le Loctite de toucher le viseur à point rouge.)
- Applique du Loctite bleu sur les vis de montage fournies
- Serre les vis de montage à 15in/lbs
Vis fournies :
- 2 Vis à tête ronde - Fournies pour les viseurs Vortex Viper et Venom
- 2 Vis à tête plate - Fournies pour les viseurs Burris FastFire et Docter
Les vis incluses avec ce montage nécessitent une clé Allen de 5/64'' pour l'installation.
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter. FITS: Sig P210 Target (American Only Post 2016) EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.