Découvre le montage universel Trijicon RMR pour une précision ultime !
Le montage universel Trijicon RMR de la marque EGW est conçu pour offrir une stabilité et une performance exceptionnelles. Fabriqué en aluminium 7075, ce montage est recouvert d'un revêtement noir mat dur pour une durabilité accrue.
Caractéristiques :
- Longueur totale : 1.780"
- Largeur totale : 1.1"
- Hauteur totale : .335"
- Rayon : .468"
- Matériel de montage : (2) vis à tête plate 6-32, (1) vis de réglage 6-32
Le montage est compatible avec les red dots Trijicon RMR et Holosun HS507C. Il est important de noter qu'il doit y avoir un léger écart en haut du rayon entre le récepteur et le montage une fois installé. Les deux écarts sur ce montage mesurent .500"-.505" et .8625". Il convient aux diamètres de canon/récepteur allant de .936" à 1.350".
Applications courantes pour le montage à rayon inférieur de .670" :
- Fusil de chasse :
- Benelli Auto / Super Black Eagle / Vinchi, M2 (Fonctionne uniquement dans l'ensemble avant, vis 8-40)
- Benelli Supernova (Fonctionne uniquement dans l'ensemble avant, vis 8-40 et plus longues)
- Browning A-Bolt 12 Gauge
- Savage 210
- Savage 212
- Savage 220
- Stoeger M3000 / Stoeger M3500 (Fonctionne uniquement dans l'ensemble avant, vis 8-40)
- Winchester 1300
- Fusil :
- Remington 700, 722, 40x
- Remington 783
- Remington 710/770
- Remington xp 100
- Remington 4, 6, 7400, 7615 (Ensemble avant uniquement, vis 8-40)
- Modèles de centre de feu Savage Arms
- Winchester 70
Avec le montage universel Trijicon RMR, tu es assuré d'une installation facile et d'une performance de tir améliorée. Ne manque pas cette opportunité d'améliorer ton équipement !
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Overall Height: .335" Radius: .468" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C .468" bottom radius mount. There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500"-.505" and .8625". This should fit barrel/receiver diameters from .936"-1.350". .670" bottom radius mount. There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500"-.505" and .8625" which should fit the receiver ring on the following guns: Common Applications for .670" bottom radius mount: Shotgun: Benelli Auto / Super Black Eagle / Vinchi, M2 (Will Work in the Front Set Only, 8-40 Screws) Benelli Supernova (Will Work in the Front Set Only, 8-40 AND Longer Screws) Browning A-Bolt 12 Gauge Savage 210 Savage 212 Savage 220 Stoeger M3000 / Stoeger M3500 (Will Work in the Front Set Only, 8-40 Screws) Winchester 1300 Winchester SXP Rifle: Remington 700, 722, 40x Remington 783 Remington 710/770 Remington xp 100 Remington 4, 6, 7400, 7615 (Front Set Only, 8-40 Screws) Savage arms centerfire models Winchester 70