Montage de vise Trijicon RMR universel pour un ajustement parfait
Le UNIVERSAL TRIJICON RMR SIGHT MOUNT est conçu pour offrir une compatibilité optimale avec les viseurs Trijicon RMR et Holosun HS507C. Voici les détails importants :
Description du produit
- Matériau : Aluminium 7075
- Revêtement : Matte Black Hardcoat
- Longueur totale : 1.780"
- Largeur totale : 1.1"
- Hauteur totale : .335"
- Rayon : .468"
- Matériel de montage : (2) vis à tête plate 6-32, (1) vis de réglage 6-32
Le montage a un rayon de fond de .670". Il doit y avoir un léger écart en haut du rayon entre le récepteur et le montage lorsqu'il est installé. Les deux écarts sur ce montage mesurent .500"-.505" et .8625". Cela devrait convenir aux diamètres de canon/récepteur allant de .936" à 1.350".
Applications courantes pour le montage à rayon de fond de .670"
- Fusil de chasse :
- Benelli Auto / Super Black Eagle / Vinchi, M2 (fonctionne uniquement dans l'ensemble avant, vis 8-40)
- Benelli Supernova (fonctionne uniquement dans l'ensemble avant, vis 8-40 et plus longues)
- Browning A-Bolt 12 Gauge
- Savage 210
- Savage 212
- Savage 220
- Stoeger M3000 / Stoeger M3500 (fonctionne uniquement dans l'ensemble avant, vis 8-40)
- Winchester 1300
- Fusil :
- Remington 700, 722, 40x
- Remington 783
- Remington 710/770
- Remington xp 100
- Remington 4, 6, 7400, 7615 (uniquement l'ensemble avant, vis 8-40)
- Modèles de carabines à feu Savage
- Winchester 70
Ce montage est idéal pour améliorer ta précision et ta performance sur le terrain. N'hésite pas à l'ajouter à ton équipement !
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Overall Height: .335" Radius: .468" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C .468" bottom radius mount. There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500"-.505" and .8625". This should fit barrel/receiver diameters from .936"-1.350". .670" bottom radius mount. There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500"-.505" and .8625" which should fit the receiver ring on the following guns: Common Applications for .670" bottom radius mount: Shotgun: Benelli Auto / Super Black Eagle / Vinchi, M2 (Will Work in the Front Set Only, 8-40 Screws) Benelli Supernova (Will Work in the Front Set Only, 8-40 AND Longer Screws) Browning A-Bolt 12 Gauge Savage 210 Savage 212 Savage 220 Stoeger M3000 / Stoeger M3500 (Will Work in the Front Set Only, 8-40 Screws) Winchester 1300 Winchester SXP Rifle: Remington 700, 722, 40x Remington 783 Remington 710/770 Remington xp 100 Remington 4, 6, 7400, 7615 (Front Set Only, 8-40 Screws) Savage arms centerfire models Winchester 70